Telycam Drive+ SE HDMI Wh

Full-HD PTZ Camera

• 1/2.8" Sensor
• 20x optical zoom and 60° field of view
• Full HD 1080p 60fps
• HDMI, USB
• NDI HX
• Tally on the front of the base
• Dimensions (L x W x H): 220 x 190 x 173 mm
• Weight: 1.35 kg
• Colour: White

Technical specifications:

• Sensor and lens: 1/2.8", 2.4MP CMOS sensor
• 20x optical zoom
• Lens: f = 4.9 ~ 98 mm, F1.5 ~ F3.0
• Horizontal viewing anglew: 60° (wide) ~ 3.2° (telephoto)
• Vertical viewing angle: 34.14°~1.12°
• Diagonal viewing angle: 67.08° ~ 2.27°
• Focus range: from 1.0 m
• S/N Ratio: = 50dB
• Noise reduction: 2D and 3D
• Minimum brightness: 0.7 lux (50 IRE Max AGC 1/30 F1.8)
• White balance: ATW, Manual, Auto, Indoor, Outdoor, One Push, Sodium, Fluorescent
• Exposure: Auto/Manual/Shutter Priority/Iris Priority/Brightness Priority
• Anti-Flicker: OFF, 50 Hz, 60 Hz
• Image Flip: supported
• Mirroring: Supported
• Focus: Auto/Manual
• Iris: Auto/Manual
• Electronic shutter: Auto/Manual
• Gamma: supported
• Backlight compensation: supported
• Input voltage: DC 12 V, POE+ (IEEE802.3at)

Video formats:

• NDI HX: 19201080@3~60, 1280720@3~60, 1024576@3~60, 640360@3~60 (low bandwidth mode)
• HDMI: 19201080P60/50/30/25/59.94/29.97/24/23.98, 19201080I60/50/59.94, 1280
• USB 3.0: 19201080P60/50/30/25 (USB 3.0), 1280720P60/50/30 (USB 3.0), 1280720P25 (USB 3.0 und USB 2.0), 1024576P30 (USB 3.0 und USB 2.0), 960540P30 (USB 2.0), 640360P30 (USB 2.0), 512

IP streaming:

• Video Encoding: H.264 / H.265
• Bitrate control: Variable bitrate (VBR)
• Constant bitrate (CBR)
• Bitrate range: 1024 ~ 16384 Kbps
• Network Port Speed: 1000M
• Protocols: NDI HX, SRT, HTTP, RTSP, RTMP, DHCP, ONVIF, VISCA over IP, VISCA TCP, VISCA UDP, Pelco P/D, RTP Multicast, HTML

I/O interface:

• Control Port: RS232, RS485, NDI HX, USB 3.0(UVC1.5), USB 2.0(UVC1.1)
• Video Port: NDI HX, HDMI, USB 3.0
• Audio Port: 3.5 mm Line input
• Tally: Supported
• POE+: supported
• Daisy chain: supported