Sommer Cable Symbiotic3

Microphone / Audio Cable

3-wire
Bal. Microphone / Audio cable for broadcasting applications and live technology
Double spiral shielding made of oxygen-free copper
3x 0.20 mm²
Shielded against RF interference
Incl. ground line for grounding i.e. turntables

Available since August 2010
Item number 251540
Sales Unit 1 metre(s)
Colour Black
Diameter 0,2 mm²

37 kr

All prices incl. VAT

Sales Rank

in Microphone Cable by the Meter

This is what customers who viewed this product bought

Sommer Cable Cicada SO-D14

13,90 kr

10%

bought

Sommer Cable SC Stage 22 Highflex SW

14,30 kr

10%

bought

Sommer Cable SC Goblin BK

15,50 kr

bought

Sommer Cable Galileo 238 Plus BK

35 kr

25 Customer ratings

5 19 Customers 4 3 Customers 3 2 Customers 2 0 Customers 1 1 Customer

4.6 / 5

quality

Review guidelines

10 Reviews

Good quality cable that has issue when soldering with lead-free solder

leonlag 08.11.2025

The inner conductor insulation cannot withstand the temperatures used used to solder lead-free solder(300C). It's not that big of a deal when soldering the invidual wires since you can simply heat up the contact on the connector and then quickly dip the conductor into the molten solder. The issue is more noticeable when trying to solder the shield as that is obviously wound around the individual conductors and can sink quite a bit of head due to it's bigger diameter.

Soldering this with lead-free solder is definitely doable but I wouldn't buy this again for this reason and would rather look for something with silicone insulation around the conductors.

Report

Do you believe this rating to be inaccurate or unacceptable for some reason? Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions.

PAFT Audio 24.05.2025

Good quality and good sounding cable for independent 3 wire XLR plus additional shielding. The shield is very good quality. I measured the capacity for my 5 meter cables. The capacity between the active wires is about 370pF and the shield to active about 600pF. This gives about 1 degree phase error in 20kHz and the frequency start slight to roll off after the 70kHz range.