Harley Benton G212 Vintage Vertical

Guitar Cabinet

  • Equipped with: 2 x 12" Celestion Vintage 30
  • Power rating: 120 W
  • Impedance: 8 Ohm
  • Housing made of 16 mm poplar plywood
  • Made with black Tolex
  • Decorative strips
  • Dimensions (W x H x D): 49.5 x 65.8 x 35.5 - 29.5 cm
  • Weight: 24 kg

Further Information

Max. Load 120 W
Stereo No
Weight 24,0 kg

This product is currently sold out

These are other customers' choices:

Harley Benton G212 Vintage
65% bought Harley Benton G212 Vintage NOK 1,867.23
Harley Benton G212
4% bought Harley Benton G212 NOK 1,175.63
Marshall MX212AR
3% bought Marshall MX212AR NOK 2,520.17
Marshall Code 212 Cabinet
2% bought Marshall Code 212 Cabinet NOK 1,420.17
Our most popular 2x12 Guitar Cabs
119 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.9 / 5.0
  • features
  • sound
  • quality
95 written ratings Read all reviews
Damaged and Repaired
Tubeguru, 14.11.2019
My Harley Benton G212V with V30's arrived. I pulled it from the shipping box which was in good shape. I noticed some rattling around inside the cab which concerned me. The rear is glued and there is no way to remove the back without damaging the cabinet to look inside, I noticed. Removing the front grille I saw that the baffle board for the top speaker had been pushed in almost 3 inches (76mm) on the right side and was barely hanging on under the weight of the V30. I took pictures of the damage and contemplated returning the cab back but figured I would see if there was any possible way to fix it before it went back to Germany. I had waited 7 weeks anyway.

Removing the top and bottom V30's revealed several of the wood shims used to keep the baffle boards in place had cleanly broken away either because there was not enough glue, weren't stapled properly, cab was shipped too quickly (i.e. "still wet") or probably a combination along with shipping handling from China to US.

I used a rubber mallet, carpenter's glue and wood screws. I tapped the baffle back in place, glued the baffle and glued and screwed all of the shims to support the baffle boards better. I decided I would also add RTV to the baffle seams which had good sized gaps to seal the cab better and is the point of having a closed back sealed cab (reduce air movement for "faster" speaker return). I also figured since I had it open anyway I may as well change to 16 ohm cab wiring by adding 8 ohm V30 / G12H30 Anno speakers in series which I had. I really like this speaker combination. 3 hours later; total success!

- I use this with several of my tube heads and it sounds great now with the mismatch and better tightness. The size, speaker offset and vertical layout make it a great "monitor" type cab when compared with a horizontal.

- Light weight and compact.
- Resonant all Plywood construction.
- Great sounding after speaker changes.
- Speaker Offset is a nice touch.
- Light to Medium duty cab,
- Price was amazing.

- Initial Issues with baffle / shims / shipping handling and unplanned repairs that needed to be done.
- Thoman consider having the manufacturer seal around the baffles with quick dry RTV or adhesive which is a fast, low cost fix and should improve shipping survival of the baffle and definitely sound.
- Consider having manufacturer screw the baffle shims or better stapling them, again, making the cab more shipping survivable as well if not letting the glue dry before shipping.
- Consider changing the back to a "screw-in" rear rather than glued in rear. It does add a bit of cost but make speaker changes and fixes easier inside the cab if needed without having to remove the speakers and grille.

- After the repair, glue, some screws to hold shims in place, adding a little sealant and a speaker change this is awesome sounding cab. Nice tight, sounds great with my tube heads. May buy another! I have the skills and tools to repair it if needed. :)
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
It's a fantastic Cab
Tsvetan Tsvetkov, 05.09.2019
Honestly I don't want to move a 4x12 arround and a 2x12 is the best option for me. I don't see why I should pay premium for the same product but by one of the bigger brands. This thing sounds awesome and when you consider the price it's a no brainer.

What I like (except the sound) is that it's very light. Moving it arround is absolutely no problem. The only negative I can think of is that it's a bit narrow for a full sized guitar amp, so my Bugera 333xl stands on it's belly on it, but that's not an issue for me.

In conculsion: If you are looking for a light, great sounding, Vingate 30s loaded cab, which doesn't leave your bank account dry like a desert, this is the one.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
NOK 2,015.97
Plus NOK 200 shipping

Since we ship from Germany additional costs through taxes and customs may occur

In stock within 1-2 weeks
In stock within 1-2 weeks

This item is expected back in stock soon and can then be shipped immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
Online Guides
Guitar Amps
Guitar Amps
The following pages give an overview of the various types of guitar amp available.
Online Guides
Guitar Setups
Guitar Setups
The range of available guitars and amps has never been greater than it is today, and a huge variety of sounds are easily accessible.
Online Guides
Guitar Amp Heads
Guitar Amp Heads
Though there are other options, the stack remains a rock icon, and is still the most flexible form of guitar amp­li­fic­a­tion.
test results:
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
Recently Viewed
JBL Eon One Compact

Active 2-Way PA Speaker with Battery Operation Equipped with: 8" Woofer and 1" tweeter, Mobile battery speaker for concerts, school shows, conferences, church services, sporting events, presentations and parties, Excellent sound thanks to 2-way active concept and digital technology,...

Recently Viewed

2-Channel USB C Audio Interface 24-Bit / 192 kHz AD/DA converter, 2 Microphone preamps with individually switchable +48 V phantom power on each one, 2 Line inputs: 6.3 mm XLR / Jack Combo (switchable to Hi-Z instrument input), 2...

Recently Viewed
Teenage Engineering PO-137 rick & morty

Teenage Engineering PO-137 rick & morty; vocal synthesizer and sampler; integrated microphone for sampling; 120 seconds sampling time; 8 voice characters; 8 effects; parameter lock (2 parameters per sound); 16-step sequencer; 16 patterns; "Lock Tab" write protection for patterns; transpose...

Recently Viewed
Hercules DJ Learning Kit

DJ Set Consists of DJ Control Inpulse 200, HDP DJ45 headphones and DJ Monitor 32 speakers Features of DJ Control Inpulse 200: DJ controller with integrated USB audio interface, Control elements per deck: Jogwheel (90 mm),...

Recently Viewed
iZotope Music Production Suite 3

iZotope Music Production Suite 3 (ESD); plug-in bundle; extensive collection of software tools for music production, mixing and mastering; contains Ozone 9 Advanced, Tonal Balance Control, Neutron 3 Advanced, Nectar 3 incl. Celemony Melodyne Essential and RX 7 Breath Control,...

Recently Viewed
DPA 4266-OC-F-F00-ME

DPA 4266-OC-F-F00-ME, d:fine CORE 4266 Omni Flex Headset Mic, Dual Earset Omni Tan two ear headset microphone, DPA 66 capsule of the famous DPA 4066 headset, omni-directional, 20 - 20.000 Hz, 144 dB SPL max, designed to fit easily and...

Recently Viewed
Electro Harmonix Ram's Head Big Muff Fuzz

Effect Pedal for Electric Guitar & Bass Fuzz, A faithful reproduction of the popular 1973 V2 Violet Ram's Head Big Muff Pi sound, Controls: Volume, Tone, Sustain, True bypass, LED: Effect on, Footswitch: Effect bypass, Input: 6.3 mm jack,...

Recently Viewed
Harley Benton JB-20 BM Standard Series

Electric Bass Neck attachment: Bolt-on, Body: Poplar, Neck: Maple, Neck profile: Modern C-shape, Fretboard: Amaranth, Inlays: Dot, 20 Frets, Scale: 864 mm, Nut width: 38 mm, Double action truss rod, Pickups: 2 x JB-Style single coils, Electronics: 2 Volume...

Recently Viewed
Yamaha THR10II

Modeling combo for E-Guitar 5 Memory/storage spaces, Realistic tube amp sounds en playing feel, With integrated effects, Bluetooth and USB, New amp-models for E-Guitar and bass, Microphone models for electric-acoustic guitars and flat voicings, 3 Amp-modi per amp-type: modern,...

Recently Viewed
Behringer C210

Behringer C210, 200 Watt Powered Column Loudspeaker with an 8" Subwoofer and 4x 2,75" HF-Driver, LED Lighting, Bluetooth 4.2 Audio Streaming, Remote Control, USB- and SD / MMC-Card MP3-Player, 3 Channel Mixer, 200 W Class-D Amp, Input: Line-In 1x XLR/TRS-Combo-Socket,...

Recently Viewed

USB 2.0 audio interface / mixer for Livestreamer 24 Bit / 48 kHz AD/DA converter, Integrated MIDAS preamplifier, Creates multiple virtual USB audio devices for most applications to, Change the volume of the applications independently of each other, Integrated...

Recently Viewed
XAOC Devices Hel

XAOC Devices Hel; Eurorack module; Polyphony Commander for Odessa oscillator (item 474296); control up to 5 voices of polyphony via individual CV inputs (1V/Oct.); powered via the main module; width: 3 HP

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.