Decotruss 3 Point Truss Silver 2m

112

Truss

The Decotruss elements can be screwed together with the connecting plates with three M8 screws. Through a variety of cross beams and corners you can create fantastic structures. Decotruss is suitable to create individual design-elements, such as shopfitting and trade show booths. Decotruss constructions can be used as design elements or for low weight installations. Please respect the regulations in respect to trussing constructions.

  • Decorative truss
  • Easy installation
  • Max. distributed section load: 35 kg
  • Longitudinal tubes: 15 x 1.5 mm
  • Crossbars: 5 mm
  • Dimensions: 2000 x 150 x 130 mm
  • Weight: 4.55 kg
  • Optional connection kit / screw set: Article Nr. 509495 (not included)
Available since July 2004
Item number 171759
Sales Unit 1 piece(s)
Feature Straight
Length or diameter 200 cm
Tailings 2
Colour Silver
System Decotruss
B-Stock from 858 kr available
999 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

112 Customer ratings

4.4 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

44 Reviews

UB
Decotruss - detailed description and usefullness
UK Beachboys 12.05.2015
When I ordered the truss sections, I wanted something to support a fairly light moving head vertically. Thomann and Decotruss make it quite plain that this is not structural truss - it's primarily for things like exhibition booths, with perhaps a few lightweight lights hanging from it - looking good and modern, but being useful.

My requirement was for vertical loading on a single section, and I wasn't sure exactly how strong this design was - so I ordered it.

In terms of construction, the truss is made from 15mm aluminium, about 2mm wall thickness. The chord to chord bracing is 5mm solid section. The 2m length, supported at it's ends horizontally easily supported my 15 stone weight in the middle with no flexing or deformation. This proved my vertical loading was not going to be an issue.

The weak link in the design is that sections are joined together with 3 10mm nuts and bolts that secure the welded in end plates face to face. The end plates are welded to the chord tubes and the thickness is not thick enough to be rigid and not bend. If you joined two 2m lengths horizontally, the strength at the centre is just the three welds and the two plates. They WILL bend with anything other than a light top load. This backs up the warnings in the documentation.

I would happily use it to make up a lightweight and good looking projection screen surround, or hang some lightweight LED fixtures from it - but not a heavier fixture in any situation when two pieces have been joined horizontally.

In terms of construction, the welding is pretty good, but some of the cross bracing is cut a little short, or at the wrong angle, so the bracing doesn't actually touch the chord tube, and the weld has to fill the gap. The paint finish is good, but will chip if you catch the tube on a sharp edge. It does exactly what I wanted, so for my use, it's amazingly cheap and useful.

The silver finish is really grey by the way, not very silvery in the light.

I will certainly buy more of this - it's much more cost effective than structural trussing, and much cheaper - but just remember the warnings - it is NOT structural and joining pieces together robs much of the strength the tube itself has.
quality
5
0
Report

Report

d
Nice deco truss!
dutchsoundman 07.01.2021
Its a very nice deco truss for my terras at home :-)
quality
0
0
Report

Report

d
Decotruss 3 point
davincy 15.12.2023
very nice for decoration in your home studio
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
A
Wie die Großen
Anonymous 13.12.2015
Habe 2 solcher Traversen in meinem Wohnzimmer im Einsatz. Die Optik überzeugt. Sieht aus wie bei den "echten"

Habe die Truss mit den Decotruss C-Haken und 10er Dübeln in der Decke befestigt. Jeweils 4 Haken pro 2 Meter Truss.

Angebracht sind 5 LED Flat PARs und ein LED Spot für eine Spiegelkugel.

Super Stabil. Man kann sie auch als Klimmzugstange benutzen sofern die Verankerung in der Decke ausreichen dimensioniert ist.

Der Pulverlack ist durchgehend und Schlagfest. Wenn man die C-Haken vorsichtig eindreht bleibt auch der Lack heile. Einziges Manko: hier und da sind kleine Lacknasen oder die Schweißpunkte sind nicht 100 Prozent perfekt. Für den Preis gibts aber nichts besseres.
Klare Kaufempfehlung.
quality
5
0
Report

Report