To the page content

Yamaha AG06 MK2 BK

21 Customer ratings

4.3 / 5

handling

features

sound

quality

Yamaha AG06 MK2 BK
2.299 kr
All prices incl. VAT
In stock within 4-5 weeks
1

17 Reviews

M
A powerful mixer with an audio interface with dealbreakers
M_Ene 17.11.2026
Get ready for a very detailed review because this thing is a hit or miss depending on who you are.

This audio device is really versatile, with 2 XLR+Line-in combo ports for MIC/LINE/HI-Z (the HI-Z is only on the second input) for channels 1-2, 2 line-in stereo jacks for channels 3-4 (channel 3 can be mono), 2 stereo RCA-in ports for channels 5-6, an AUX port that doubles as a mono output because it's TRRS and 2 USB-C ports for the audio interface and optional external power source. You also have an AMP simulator (only for the HI-Z channel 2), equalization, compression and a mute button for ports 1-2.

Additionally, you can use a headset input for a headset mic or a clip mic, replacing channel 1, a pedal switch port to mute yourself or add reverb with an external pedal and a MIX MINUS button that lets you hear channels 1-2 on your monitors and headphones.

As for outputs, you have 2 monitor out jacks, 1 headphone jack (that can be replaced by a headset output instead with the headset 3.5mm jack) and two clean stereo out jacks.

There are 3 different streaming out modes on this device.

- Dry CH1-2, which outputs channels 1 and 2 dry and clean, ignoring the mute button, reverb, compressor, EQ and the volume knob.
The gain knob will be what determines the volume of your output sent to your PC/Tablet/Mobile phone through USB-C.
- Input Mix, which will capture Channels 1-6 and the AUX port. Pretty straightforward.
- Loopback, which behaves exactly like Input Mix but this time it will include the audio from your PC.

As mentioned before, the AUX port is TRRS, so audio mono from the interface will be outputted from there, but it has its own rules:

- DRY CH1-2. It will output channels 1 and 2 just like it will through USB-C
- Input Mix. It will output channels 1-6, ommiting the AUX port.
- Loopback. It will output channels 1-6, your USB-C PC/Tablet/Mobile phone audio AND the AUX input audio.

Not so straigthforward, but easy to understand. Both AUX out and USB-C out can be used simultaneously, which is huge for mobile and PC audio recording or streaming, just that the AUX out is mono at all times.

So far so good, right? Well... kinda

This audio interface/mixer has an issue with channels 3-4, 5-6 and the USB-C PC/Tablet/USB output. There will be an audio imbalance of 0.5-1 db making the right channel hotter, unless you turn the volume knob for those channels to the max, which will distort the sound.

This can be an issue for a producer who's mixing audio on their PC, possibly causing an audio imbalance. The difference is small enough that you might not even notice, but it's there for those who care.

The output impedance of the headphone jack is 120ohms, which is absolutely absurd. This will matter for producers who are mixing audio with headphones because it will shift the frequency response by a lot.
In case you have no idea what I'm talking about, a 0 ohm output impedance is what a producer should use to have accurate audio. A high output impedance can cause a boost or drop in bass, mids or treble in an unpredictable way, depending entirely on your headphones.

Thankfully, this can be mitigated using the Stereo Out jacks of the Yamaha if you route them to an external dedicated AMP. This can easily cost you a 100$. If Yamaha invested on better amps, maybe making the device cost a bit more, it would have made this step completely unnecessary, not to mention the 2 extra cables and the external amp.

The monitor output has 150 ohms of impedance as well.

The DSP effects are convenient and all, but sadly, the quality is pretty meh. The AMP SIM, compressor, EQ and reverb could be better overall.

The software is really good actually. The only inconvenience is that every time you open it, your settings get reset and you have to set them up again

The DRY CH1-2 mode sets channel 1 as the left channel and channel 2 as the right channel, just like an audio interface would do. If you use Input Mix or Loopback, these two channels are set to mono by default. If you plan to do ASMR on those modes, this can be changed in the software.

And that's pretty much it. The audio imbalance, meh DSP effects and the high output impedance make me recommend this audio device only to streamers, content creators and musicians who'll use dry channel 1-2 and send the recordings to a producer (the musician is not the one mixing the audio with this device). Producers could use this device with an external amp, but I'm still unhappy with the channel imbalance.

The fact that Yamaha recommends this audio device to producers on official guides like Vocaloid software videos makes me sick. Those 120 ohms aren't good at all for this application

And the audio imbalance issue is not caused by a fautly unit. I had 3 of these, one that I bougth second hand, a unit I bought here that had a 2db audio imbalance that I returned and my current one. The second unit I got here was faulty, but my current one and the second hand one isn't. Also, this issue is VERY common with the MG series, at least the cheaper units
quality
features
handling
sound
0
0
Report

Report

Yamaha AG06 MK2 BK