There are no text reviews available yet for this product.
Have you bought this item from us? If so, you now have the opportunity to write the first ever customer review about this product!
S
Cable diameter 5mm or 8mm with rubber removed, Torx 7 screw
The screw on the side requires a Torx #7 key. It also has a slot cut in, but the cut does not extend to the sides of the screw, meaning you need a screwdriver with a blade ideally 3.75mm wide, but no wider.
The cable clamp is a simple metal C-clamp to bend over the cable. A small cable tie may be needed.
The diameter of the rubber tube is 5mm. Removing the rubber tube gives you 8mm.
It does not work with pro snake AX-Highflex 8-core cable (Item 499406) which has a diameter of 9mm. 1mm may not sound like much but I have tried and tried and just does not fit. I purchased 20m and I cannot use it, so it's going straight into the metal recycling.
It is so annoying that Thomann often fails to supply key information on the products it sells. Such a waste.
The cable clamp is a simple metal C-clamp to bend over the cable. A small cable tie may be needed.
The diameter of the rubber tube is 5mm. Removing the rubber tube gives you 8mm.
It does not work with pro snake AX-Highflex 8-core cable (Item 499406) which has a diameter of 9mm. 1mm may not sound like much but I have tried and tried and just does not fit. I purchased 20m and I cannot use it, so it's going straight into the metal recycling.
It is so annoying that Thomann often fails to supply key information on the products it sells. Such a waste.
0
0
Report
