j
Used to make leads for drum triggers
Pros
+ Seems durable
+ fits securely in sockets
cons
- barrel often comes off plug
- the fit in sockets may be too tight, feels like it may wear down the socket
Pros
+ Seems durable
+ fits securely in sockets
cons
- barrel often comes off plug
- the fit in sockets may be too tight, feels like it may wear down the socket
0
0
Report
K
Best for buck for sure
I use these for permanent installation. They do just great. Good quality, no problems or melting when soldering.
There is no plastic part that pinches the cable in place, like neutrik connectors have (obviously), so maybe not the best (durable) option for stage cabling.
There is no plastic part that pinches the cable in place, like neutrik connectors have (obviously), so maybe not the best (durable) option for stage cabling.
0
0
Report
A
Old School,Great Stuff!
These are brilliant for replacing those awful moulded on types or over-complex expensive brands that are hard to fix!
I have brought a load of leads back from the dead(including some old curlys)or very quickly made custom lengths for pedal boards,DI's etc...
Give the lugs a light rub with fine emery paper before sanding and if possible use a separate flux and stick or coil solder rather than cored...
For live use either a dab of nail varnish or a thread lock paste helps to stop the grip unscrewing from the barrel...
Vital these,always have spares lying around
I have brought a load of leads back from the dead(including some old curlys)or very quickly made custom lengths for pedal boards,DI's etc...
Give the lugs a light rub with fine emery paper before sanding and if possible use a separate flux and stick or coil solder rather than cored...
For live use either a dab of nail varnish or a thread lock paste helps to stop the grip unscrewing from the barrel...
Vital these,always have spares lying around
0
0
Report
m
Decent quality metal jack for price
at this price was not worth buying plastic ones. I used them for the back of a TRS patchbay so not going to take much strain
0
0
Report
D
Very good
Easy to solder and well done
0
0
Report
I
Good connector.
Work fine. The holes are maybe a bit small, but not unworkable.
0
0
Report
C
An easy way to make cheap cables!
These brilliant little connectors have saved me so much money I could have spent buying cables! Each individual plug comes with it's own plastic sleeving to cover the main connectors and the spring at the end is amazing to prevent my dodgy soldering! Overall a brilliant product and a super way to make jack cables.
0
0
Report
M
works perfect
if you get both the stereo and mono plugs of the same model, do not mix them up. the mono plug end has a thinner diameter on the screwing mechanism than the stereo plug.
0
0
Report
GQ
Great build quality for an amazing price
0
1
Report
F
Works perfectly
I ruined my mate's headphone jack by standing on it. This was easy to solder and is still working well nearly 3 years later.
I'm very happy with this and so is my mate.
I'm very happy with this and so is my mate.
0
0
Report
