Thomann Case Behringer Xenyx 2442

I bought this to protect my 2442 in transit (obviously). It’s a well padded box that does (did) the job. There is decent sized storage space at the rear in which I keep the power lead and two 15m Pro Snake XLR cables to run to the speakers, and with the mixer in the box there is also some storage space available underneath for odd small items. I keep a bluetooth adaptor and some short connecting cables there.
Just three things to note. Firstly the foam pad at the front is a little too thick and stops the mixer from sitting flush on the side supports on its 19 inch rack rails. Secondly there is no access to the rear of the mixer with it in the case but it is best to remove the mixer anyway to avoid it overheating. Thirdly the lid is on fixed hinges, so I take the mixer out and put on the box when in use.
Lastly, just out of warranty, and with frankly not a great deal of use the handle came off and took a large chunk of the front off with it. I won't be buying a replacement.
To conclude, I was OK with the case until it broke.

I bought this for protecting a 16 channel (2442) behringer mixer that I have in stock, mainly as a back up. the intent was to protect it while it was moved occasionally and while on the shelf. to that end, the case is fine - i's not however robust and you shouldn't confuse it with a proper flight case. If what you want is occasional use and protection then this is the case...if you want something heavy duty to take reeated bashing then you need to look for something else at a higher price pint, the panels are not as substantial as standard ply or astroboard and the catches are easy to mis align and no where near as robust as a butterfly catch - but then one needs to remember that this case is half the cost. for occasional use or careful repeated use it's fine.