t.akustik nook set big 36

15

Absorber set to optimize room acoustics

  • Set contains 36 single units for individual attachment
  • The sum of all 36 single pieces equals approx. 1.44 m² ( corresponding 4 times the size of an 60 x 60 cm acoustic element)
  • Absorber Material: Polyester acoustic foam
  • High absorption rate
  • Main frequency / effective range from approx. 200 Hz
  • Flame retardant according to FMVSS 302
  • Burning rate> 101.6 mm / min
  • Dimensions per piece: 200 x 200 x 300 mm
  • Colour: Anthracite
  • For handling and attaching Acoustic adhesive Article Nr. 177265 is recommended (not included)
Available since July 2014
Item number 344700
Sales Unit 1 carton(s)
Material Polyester
Colour Grey
Dimensions per piece in mm 200 x 200 x 300
1.385 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

15 Customer ratings

4.8 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

10 Reviews

DQ
A great affordable alternative absorber.
Declan Q. 16.10.2014
These are very well made and very effective.
They arrive in one big but light box.
They are strong foam but still very light so easy to hang (just make sure to use strong glue because they will fall off otherwise).
There are very effective in killing the low frequencies bouncing around the back wall of my studio. I use them in conjunction with homemade rockwool baffles and EQ Acoustics Classic Wedge Tiles.
I would recommend them as an affordable alternative to an expensive customised absorber/diffuser.
The big set, as opposed to the smaller ones, does take up quite a bit of room as they come out 30cm from the wall so you need to make sure you have room for them.
quality
7
1
Report

Report

I
best product for my anechoic chamber
Iceguy 16.10.2019
easy, light, cost effect and look fabulous.
quality
1
0
Report

Report

H
Cheap but efficient
Hieronymus 29.05.2020
Pasted on ceilings. Make a great difference to room reverb porformance. Down to less than 0.5 sec up from 200 Hz. Maybe a better test result if I buy more and paste them on walls.
quality
2
0
Report

Report

google translate fr
Unfortunately there was an error. Please try again later.
j
Acoustique P4 ?
jctroyes 28.10.2014
Le visuel fait penser beaucoup aux corrections effectuées en labo acoustique P4.
Il n'est est rien et n'oublions pas que nous parlons ici de correction du TR60 (temps de réverbération) ainsi que quelques ondes stationnaires.

Bien que l'on puise regretter aucune information sur les coefficients alpha sabine du produit, on peut estimer des performances orientées plutôt autour de 500hz. La densité du produit semble correcte mais pas extraordinaire. En tout cas cela reste la plus belle densité dans les gammes Thomann.

La forme des traitements permet une légère diffusion et donc assez conseillée pour le traitement d'ondes stationnaires et à l'approche des angles d'une pièce.

Déconseillé aux débutants non documenté en acoustique.
Je préfère utilisé une colle type pate qui permet l'ajustement, plutôt qu'un spray.
Prévoir un jeu d'épingles ou clou sans tête provisoire car le produit est assez lourd.
Un niveau pour aligner (voir niveau laser).
quality
10
0
Report

Report