A
Pro Snake Patch - Professional Angled Jack Patch Cable.
Pro Snake Patch - Professional Angled Jack Patch Cable.
I bought a few of these little angled jack patch cables a few years ago with the intention of them only being a temporary solution while I worked up a new pedal board layout.
I had originally intended to replace them with custom cables made to measure but three years later and these little cables are still going strong and I have no intention of upgrading, in fact I keep coming back for more of these as I am putting together yet another pedal board.
I do have another pedal board with custom made to measure patch cables and I honestly can not hear a difference between them.
These cables certainly do not "suck tone" like the cheaper little coloured patch leads with moulded ends that cost around the same.
The cables are just 15cm long with a good quality metal angled jack at each end, the jacks are not moulded so they can be unscrewed to examine the solder joints, all joints are neat and tidy, dispute the low price these are well made quality patch cables".
These little cables are cheap, well made and just about the perfect length for linking effects, what's not to like !!!
I bought a few of these little angled jack patch cables a few years ago with the intention of them only being a temporary solution while I worked up a new pedal board layout.
I had originally intended to replace them with custom cables made to measure but three years later and these little cables are still going strong and I have no intention of upgrading, in fact I keep coming back for more of these as I am putting together yet another pedal board.
I do have another pedal board with custom made to measure patch cables and I honestly can not hear a difference between them.
These cables certainly do not "suck tone" like the cheaper little coloured patch leads with moulded ends that cost around the same.
The cables are just 15cm long with a good quality metal angled jack at each end, the jacks are not moulded so they can be unscrewed to examine the solder joints, all joints are neat and tidy, dispute the low price these are well made quality patch cables".
These little cables are cheap, well made and just about the perfect length for linking effects, what's not to like !!!
2
0
Report
FR
Perfect!
This cable is lightweight and flexible with very good signal clarity. So on the sound aspect, nothing to be disappointed. thomann
To be honest it is not comfortable as I expected due to the thick angled plug but still it is my first choice in my pedalboard. The thickness improves the final quality and durability. I think it competes with way costly cables, I don't hear any difference thomann with other ones.
The overall quality is pretty good, I never had any problem till now.
I suggest to use the one with this lenght to connect something "out of the pedalboard" as a wah or volume pedal, and to use the 0.15m version for standard pedalboard connections.
To be honest it is not comfortable as I expected due to the thick angled plug but still it is my first choice in my pedalboard. The thickness improves the final quality and durability. I think it competes with way costly cables, I don't hear any difference thomann with other ones.
The overall quality is pretty good, I never had any problem till now.
I suggest to use the one with this lenght to connect something "out of the pedalboard" as a wah or volume pedal, and to use the 0.15m version for standard pedalboard connections.
1
0
Report
A
Typical quality and good price
Rather cheap patch cables aqcuired mostly for testing purposes while creating a small pedalboard. However they seem rather good, probably will keep them for the future.
0
0
Report
EF
Better than the colored ones!
Better than the colored ones for sure!
0
0
Report
MA
Right for the job
Cheap, does what it was design for, why look anywhere else?
0
0
Report
M
Works fine
Works fine for me. Good Val for money
0
0
Report
e
High quality cable
I've had it for years, still working. The cable does not introduce any noise to the chain.
0
0
Report
A
Highly recommended !!!
The "Pro snake Patch Angled Jack 0,15 m" is about the cheapest little patch lead you will find but the cheap price is not an indication of quality, these are a great little patch lead and very high quality.
I run a fairly long pedal chain in my rig, a dozen pedals so I'm using eleven of these patch leads and with all pedal off I don't have any noise, compared to running a guitar straight into my amp I'm not noticing any drop or losses so I have no complaints.
The metal angled jacks offer plenty of cable protection but these patch leads also have a piece of heat-shrink tubing at each end of the cable which covers the solder joints and adds further protection and stability, these are well made and durable patch leads.
They seem to be the perfect length, not too long and not too short, just right, I'm running a mixture of pedals in two rows of six with inputs and outputs in various positions on the back and sides and the 15cm leads are just long enough for every joint.
If your joining two identical pedals with sockets on the side the angled jacks allow you to couple them with just 40mm between pedals so they are a really neat solution.
When I started using pedals I was just using the cheap multi coloured leads with moulded plastic covered jacks that often come free with pedals, as a result my pedal chain crackled and hissed constantly, after that I "upgraded" with Planet Wave patch leads which was a huge mistake, the jacks fell apart and jammed in the sockets, these pro snake patch leads are a much better solution, very quiet and good quality jacks, highly recommended
I run a fairly long pedal chain in my rig, a dozen pedals so I'm using eleven of these patch leads and with all pedal off I don't have any noise, compared to running a guitar straight into my amp I'm not noticing any drop or losses so I have no complaints.
The metal angled jacks offer plenty of cable protection but these patch leads also have a piece of heat-shrink tubing at each end of the cable which covers the solder joints and adds further protection and stability, these are well made and durable patch leads.
They seem to be the perfect length, not too long and not too short, just right, I'm running a mixture of pedals in two rows of six with inputs and outputs in various positions on the back and sides and the 15cm leads are just long enough for every joint.
If your joining two identical pedals with sockets on the side the angled jacks allow you to couple them with just 40mm between pedals so they are a really neat solution.
When I started using pedals I was just using the cheap multi coloured leads with moulded plastic covered jacks that often come free with pedals, as a result my pedal chain crackled and hissed constantly, after that I "upgraded" with Planet Wave patch leads which was a huge mistake, the jacks fell apart and jammed in the sockets, these pro snake patch leads are a much better solution, very quiet and good quality jacks, highly recommended
3
0
Report
jb
Pro Snake Patch -
I bought a few of these little angled jack patch cables a few years ago with the intention of them only being a temporary solution while I worked up a new pedal board layout.
I had originally intended to replace them with custom cables made to measure but three years later and these little cables are still going strong and I have no intention of upgrading, in fact I keep coming back for more of these as I am putting together yet another pedal board.
I do have another pedal board with custom made to measure patch cables and I honestly can not hear a difference between them.
These cables certainly do not "suck tone" like the cheaper little coloured patch leads with moulded ends that cost around the same.
The cables are just 15cm long with a good quality metal angled jack at each end, the jacks are not moulded so they can be unscrewed to examine the solder joints, all joints are neat and tidy, dispute the low price these are well made quality patch cables".
I bought a few of these little angled jack patch cables a few years ago with the intention of them only being a temporary solution while I worked up a new pedal board layout.
I had originally intended to replace them with custom cables made to measure but three years later and these little cables are still going strong and I have no intention of upgrading, in fact I keep coming back for more of these as I am putting together yet another pedal board.
I do have another pedal board with custom made to measure patch cables and I honestly can not hear a difference between them.
These cables certainly do not "suck tone" like the cheaper little coloured patch leads with moulded ends that cost around the same.
The cables are just 15cm long with a good quality metal angled jack at each end, the jacks are not moulded so they can be unscrewed to examine the solder joints, all joints are neat and tidy, dispute the low price these are well made quality patch cables".
0
0
Report
jh
Cheap and cheerful. No brainer.
They work well and are short enough to have little effect on the sound, even on a daisy chain.
0
0
Report
