A
Easy to solder
Using these to make my own midi cables. These are easy to solder and seem sufficiently robust to withstand frequent handling.
The fitting between the metal case and the plastic core is very tight. On one connector the case was slightly ovalized, not that this could be visible to the naked eye, but enough to prevent the plastic core to slide to its position. A gentle press on the metal opening with a suitable sized drill was enough to sort this out, but if I had not the proper tools I would be stuck with an unusable item.
The fitting between the metal case and the plastic core is very tight. On one connector the case was slightly ovalized, not that this could be visible to the naked eye, but enough to prevent the plastic core to slide to its position. A gentle press on the metal opening with a suitable sized drill was enough to sort this out, but if I had not the proper tools I would be stuck with an unusable item.
0
0
Report