FS
Goods okay but needs manual hole threading
The product has a manufacturing step where they thread the holes first and then powder coat (paint). In the powder coat step, the threads are filled with paint and the screws no longer fit in the 48 rack holes on the front.
This can be solved with tools such as a tap holder and a standard tap for M5 (5 mm diameter). The result will be good, but remember to clean and oil the tap after each hole threading. The time it takes to do this by hand on a rack is about 2 hours and of course it lowers the rating for its quality.
The thickness of the goods in this product is okay and after threading you will not have the complaints that the threads break like with the “Adam Hall STRS12U Rack Stand 12U” (less goods, weighs less).
It is advantageous to buy M5 nylon washers for the rack screws to protect the rack units' rack ears during assembly.
Ordered two of these and the delivery arrived fast. However, one of them was defective (crocked) at arrival (slightly crocked welding joints). After creating an RMA Thomann decided to give me the money back for the defective stand and I did not have to return it.
This can be solved with tools such as a tap holder and a standard tap for M5 (5 mm diameter). The result will be good, but remember to clean and oil the tap after each hole threading. The time it takes to do this by hand on a rack is about 2 hours and of course it lowers the rating for its quality.
The thickness of the goods in this product is okay and after threading you will not have the complaints that the threads break like with the “Adam Hall STRS12U Rack Stand 12U” (less goods, weighs less).
It is advantageous to buy M5 nylon washers for the rack screws to protect the rack units' rack ears during assembly.
Ordered two of these and the delivery arrived fast. However, one of them was defective (crocked) at arrival (slightly crocked welding joints). After creating an RMA Thomann decided to give me the money back for the defective stand and I did not have to return it.
2
0
Report
TO
No brainer for quick small rack expansions or sub - racks!
Simple and easy to setup.. stable enough for most situations, Great for the price. Open racks are sometimes very useful! Might buy another for a tabletop.
**No resonance from high sound levels!
**No resonance from high sound levels!
2
0
Report
DT
Does the job
Easy to assemble, nice finish.
0
0
Report
M
great rack for my stage mixer
i purchased behringer x air mixer and bought this rackstand. i also placed some rack adaptors for my 3 wireless receivers and after 2 years of using it, this is really great value for your money. if a will be too picky, i would have preferred it to be less slanted, but overall this is a great purchase!
thanks thomann as always!
thanks thomann as always!
1
0
Report
l
Solid rack stand for the price.
Really like it for the price. Solid. Sturdy. The top rod is smaller than my 500 rack. But I can just remove it as the rack serves the same function of holding the rack together. Honestly for this price cant complain.
0
0
Report
s
Great stand with a little bit of effort
Quality is great, as many mentioned, gotta make M5 threads because they are plastified, but it takes 5-10 mins with battery drill. Reccomended.
0
0
Report
JA
Cmon! Its a steel!
Great quality (mine was a bit wobbly). I will try to sit on it with my pet elephant...who knows it might come straight.
Totally recommended! I own already 2x6u.
Totally recommended! I own already 2x6u.
0
1
Report
Im
Great try out unit for my rig set up
Great try out unit for my rig set up Changes
0
0
Report