Millenium BS-500 Set

+Stands the test of time.
I've used this Millenium BS-500 Set since 2011.
For nearly 9 years now, they've kept my Yamaha HS80M up.
With an Auralex acoustic pad in between them.

+Reliable
The weight all rests on the thick metal pin,
which is pinned at the position/height you set the shaft to be.
After all these years still reliable & no sign of wear.

+Great cable relief from connector
There's a cable hook provided to attach to the shaft for cables.
I've positioned the hook to face the front rather than the backside so the XLR cable runs in an smooth curvature from front of shaft to back at the speaker.
This way the hook takes the weight of the cable, and not the connector that hangs from the speakers.
Both cable & speaker inputs remains as good as new.
Many overlook cable weight strain on the connector, and might damage either connector or speaker input after years hanging down.

+The Triangle base
Pockets are great for tierupping/spiral rolling remaining cable.
Keeping the power cables, audio cables separate etc
It stands sturdy, with metal carpet spikes provided to screw on for minimal ground contact.

+Base can be rotated as desired to fit with desks.
And speakers all setup can still rotate.
Nice black textured coating, never dusty & easy to clean.

Everything what's expected of a speaker stand to do it does.
Just make sure you don't place overly sized speakers on it.
Or let people walk around them to much.
It can take a nudge but not a bump. Cheers V

What do I need from a stand? Minimal practical footprint - ie big enough to be stable but not take too much space - unobtrusive, strong enough to carry expensive equipment safely, adjust to where I want it... these stands do all that for me. I like there is a choice between soft feet and spikes, I used the latter because they are on a fairly soft carpet. I like having a solid pin to hold the upper section at the height you want and the clamp to set the angle you want, this is nice because it can be set tight to not move or left a little loose to allow gentle changes of angle.

All in all, I am very happy with the stands and don't see any negative aspects. I got them in a bundle with monitors because the new monitors are too big for my desk so now I have them at either side and the ideal height. No rattles or vibration noises either just do what they are supposed to.

I just acquired the Millennium BS-500 Set studio monitor stands and could not be more pleased with my selection. These stands have certainly taken my studio setup to the next level of professionalism and usefulness.

The BS-500 stands are well-built, having a robust base that supports my studio monitors. The height-adjustable option is not only handy, but it also enables me to position my monitors for the best sound quality.

One of the most notable things for me is the cable management system. It's a little touch, but it makes a big difference in keeping my workstation clean and organised. There are no more tangled cords or tripping risks; it is simply a clean and effective setup.

Assembly was simple, owing to clear instructions and well-designed components. The stands seem sturdy and dependable, giving me confidence that my pricey studio monitors are well supported.

Overall, the Millennium BS-500 Set studio monitor exceeded my expectations. They blend utility, durability, and a stylish style, making them an ideal complement to any home studio or professional recording setup. If you're looking for dependable monitor supports that improve both design and function, the BS-500 set is an excellent alternative.

I own a pair of these speaker stands from before and found them to be good. But - they have been improved. The way they lock in height is rock-solid, and there is absolutely no wobbling from them whatsoever.

I bought these to just test if they could handle the large mid-field monitor JBL 4412 - on their side - and - then can! Seriously!

Even though the speaker holder tray is a tad small, nevertheless, by carefully balancing the speaker on this stand - it remained totally stable, and rock solid. Gently nudging to see if there were instabilities revealed none - the speaker just gently rocked and stabilised quickly.

So although arguably not defined for larger mid-field monitors - they are _so_ stable and rock-solid - I'm going to use them to support a pair of JBL 4412's! I was anticipating needing two of these per speaker - but - not necessary - the improved height lock, and totally tight base and speaker tray means that each stand can - indeed - support a JBL 4412! Incredible!

I would not dream of using these stands for this purpose if I had any doubt of instability over time - they will stand over an expensive keyboard and a mixer - but I'm confident this will work very well.