A
It does what it says
I've bought two of these; one for the measuring purposes and the other to make DIY nut files (the real nut files are terribly expensive and shamelessly overpriced, especially if you're only planning to use them once in a blue moon and there are a couple of videos on YouTube explaining how you can make them yourself out of the feeler gauges).
They come in a sort of a nylon/plastic sheath and as some of the other reviewers mentioned; they are drenched in some kind of oil, possibly to serve as a lubricant and/or to keep them from rust, so you'll likely need to keep a tissue at hand when taking them out, at least for the first several times of use, because it seems impossible to wipe it all just in one attempt.
I've used them several times now for measuring, they don't feel too flimsy and seem like they'll gonna last.They do seem a bit sharp on the edges, so be careful when handling them.
They come in a sort of a nylon/plastic sheath and as some of the other reviewers mentioned; they are drenched in some kind of oil, possibly to serve as a lubricant and/or to keep them from rust, so you'll likely need to keep a tissue at hand when taking them out, at least for the first several times of use, because it seems impossible to wipe it all just in one attempt.
I've used them several times now for measuring, they don't feel too flimsy and seem like they'll gonna last.They do seem a bit sharp on the edges, so be careful when handling them.
3
0
Report
L
It arrived oily!
This feeler gauge works just like it should, it comes with all the measurements i needed to do a basic setup on my guitar. It has more thicknesses than what you'll need but I guess its better to have too many than too little.
Shows both inches and millimeters.
Its a good pair for the Harley Benton String Action Gauge if you really want to setup your guitar to your own liking.
Only downside was that it came very "oily", i had to spent 20-30minutes going over each size 2x or 3x times to clean up somewhat properly, I presume that oily substance is to prevent corrosion. Although it was annoying to clean I also have to say that it isn't the type of oil that is hard to remove.
Shows both inches and millimeters.
Its a good pair for the Harley Benton String Action Gauge if you really want to setup your guitar to your own liking.
Only downside was that it came very "oily", i had to spent 20-30minutes going over each size 2x or 3x times to clean up somewhat properly, I presume that oily substance is to prevent corrosion. Although it was annoying to clean I also have to say that it isn't the type of oil that is hard to remove.
0
0
Report
IG
They're accurate and very, very plentiful.
They even have some extremely thin gauges that are just shy of being classified as foil. They do their job and they come in a little case for storage and protection.
My only problem is that they're almost dripping in oil. You can see how they're drenched in oil inside the case and the nut that hold the gauges in their place is prone to loosening up with use, because everything is overlubricated.
You can clean them up with a paper towel, if you feel like doing it. Otherwise just clean up after use.
My only problem is that they're almost dripping in oil. You can see how they're drenched in oil inside the case and the nut that hold the gauges in their place is prone to loosening up with use, because everything is overlubricated.
You can clean them up with a paper towel, if you feel like doing it. Otherwise just clean up after use.
0
0
Report
MM
Great for checking relief, but really oily
These come in at a really good price and work just as great for checking neck relief as some more expensive ones from luthier shops do. Unfortunately, they have quite a layer of oil on them, which makes them a bit more painful to use. The price is really compelling though, so I won't nick more stars than one and if I could, I'd give these 4.5 stars.
0
0
Report
td
Clean it before use
as reported by other users, the gauges come soaked in oil.
It needs some time and paper towels to clean it but the product is good
It needs some time and paper towels to clean it but the product is good
0
0
Report
R
Very good
Drips in oil and and it can be flimsy to find right gauge but it serves purpose well.
0
0
Report
BI
Good enough for guitar setup
Some of the thickest blades are 3 or 4 hundredths too thin or too thick, and some of the thinnest are a couple hundredths too thin or too thick, but many have the right thickness.
So this set is not for a machinist but it's accurate enough to do a good setup on a guitar, and costs very little so it can be recommended for this particular use.
So this set is not for a machinist but it's accurate enough to do a good setup on a guitar, and costs very little so it can be recommended for this particular use.
0
0
Report
A
Good choice
This tool will do the thing for reasonable price. Be aware, it has oil on it. It will dirty your hands with the oil, but don't wash the oil from the tool. Most such probes need it to be protected from corrosion. The tool comes with small bag to keep it covered. But the bag quality is bad for the tool that should be a little oiled.
0
0
Report
M
Superlative
There are more gauges than any guitar player would ever need. And as always with these things, they are drenched in lubricant.
0
0
Report
n
Very useful and practical tool
A great measuring tool, particularly for truss rod adjustments etc. This tool is quite oily when new, which is a bit annoying but I suppose it is necessary to protect the metal feelers from sticking to each other.
0
0
Report