S
Using with Lightkey
I bought this to connect my Mac using Lightkey to my DMX lights and it worked very well. Reliability is what you need in kit like this so I was pleased.
1
0
Report
s
The absolute favorite interface
My absolute favorite interface for under 100 ? !
Just for your information first: I design so light shows , in the middle frame , as I would say thomann , ie with approximately ( depending on performance ) up to 16 moving heads , lots of Par Light and LED Pars .
When I saw the article here on the website , told me first on the pictures the blue body color not to - black I would have been leiber - already after thomann unpacking I liked the case then very good.
It is not necessary a driver (which it on the website are Enttec ) to download - at least it was not the case with me . So it goes without going on the same time-consuming and annoying Installierarbeiten .
Use the interface thomann in connection with the DMX control software " Freestyler" and am more than satisfied. It is suitable for almost all software and freeware for Art-Net . It includes a complete DMX Universe - that is, 512 channels.
Done The output of the DMX data, even using many channels , in my view , very fast !
Thomann only criticism is the somewhat loose on the housing mounted USB port that can not be verrigeln Also when connecting a cable so that the cable talk easily slide out - you know this but , there should be no problem prevent this .
NOTE : It is advisable to connect a DMX Adapter Cable 5-pol. male - thomann 3 -pol. female equal to order with , unless one is in possession of such a cable . Available here at Thomann already for less than ? 5 . Just as a tip on the edge .
Just for your information first: I design so light shows , in the middle frame , as I would say thomann , ie with approximately ( depending on performance ) up to 16 moving heads , lots of Par Light and LED Pars .
When I saw the article here on the website , told me first on the pictures the blue body color not to - black I would have been leiber - already after thomann unpacking I liked the case then very good.
It is not necessary a driver (which it on the website are Enttec ) to download - at least it was not the case with me . So it goes without going on the same time-consuming and annoying Installierarbeiten .
Use the interface thomann in connection with the DMX control software " Freestyler" and am more than satisfied. It is suitable for almost all software and freeware for Art-Net . It includes a complete DMX Universe - that is, 512 channels.
Done The output of the DMX data, even using many channels , in my view , very fast !
Thomann only criticism is the somewhat loose on the housing mounted USB port that can not be verrigeln Also when connecting a cable so that the cable talk easily slide out - you know this but , there should be no problem prevent this .
NOTE : It is advisable to connect a DMX Adapter Cable 5-pol. male - thomann 3 -pol. female equal to order with , unless one is in possession of such a cable . Available here at Thomann already for less than ? 5 . Just as a tip on the edge .
5
1
Report
DN
Nice little unit for 1 universe
Good nice little box for one universe. Using this with Obsidian Onyx (v 4.2 is the lest who supports this for 1 universe). Using this for 2-4 moving heads and some LED bars. Never let me down.
1
0
Report
A
Top! quality easy to use
well, not so much to say: top quality/price ratio, easy to install, just connect it to your light system, select it in your DMX software and go!
(Windows 10 -64 bit, Freestyler X2, used in 2 different setup 25 DMX fixtures in the first, 18 fixtures in the second)
(Windows 10 -64 bit, Freestyler X2, used in 2 different setup 25 DMX fixtures in the first, 18 fixtures in the second)
0
0
Report
ec
Works with Lightkey & MacBookPro without problems
0
0
Report
T
Awesome
Affordable product for those who want to use software based dmx controllers. Wished they have a 3 Pin version but this is not an issue and can be easily fixed by buying the bundle instead.
0
0
Report
AL
Perfect for rent or small clubs
I bought it a year ago and the club where I work still uses it! Using QLight+ it's easy to learn to use it, and it's good start if you don't want to spend more money on dmx usb.
1
0
Report
A
my first dmx controller
i use enttec open for driving 4 MH 2SC and 8Led pars, i tryed it in Freestyler dmx and QLC+ all running good with laptop. Unit is perfect for small setups and mobile djs
2
0
Report
F
Simple, sturdy and compatible
Using it with a raspberry pi and a pedal to control the lights from stage while playing. Strong metal case to survive live performance environments. Works flawlessly, it is Plug and play and Linux compatible. Exactly what I needed. Very happy with my purchase.
0
0
Report
O
Best price vs. quality
Great little box. I've bought it to use it with programming software (Unity), and was able to make it work in minutes. A box itself is small, made from metal, and looks pretty sturdy. It comes with USB (2.0) cable, and once you download drivers from Enttec web site, you are ready to go.
0
0
Report
