){kind=logo}
R
Compatibility with Nano is subjective
I thought I made the wrong purchase after ordering (along with the Sol) and a Pedaltrain Nano, and then realizing that all places say that they're not compatible.
The Nano doesn't have any drilled holes for the GRIP to be secured, but the GRIP is strong enough to hold to the Nano frame, which is actually good.
I'm able to mount the Sol inside the Nano and move it across the frame to adjust its position, which is very helpful since I can accommodate some small MIDI trinkets (Garbage Collector and Source Audio midi) along the power source. If I ever needed it to stay in one place, I could just drill the holes.
The Sol remains in place and hasn't fell once. It is compatible with my Nano
The Nano doesn't have any drilled holes for the GRIP to be secured, but the GRIP is strong enough to hold to the Nano frame, which is actually good.
I'm able to mount the Sol inside the Nano and move it across the frame to adjust its position, which is very helpful since I can accommodate some small MIDI trinkets (Garbage Collector and Source Audio midi) along the power source. If I ever needed it to stay in one place, I could just drill the holes.
The Sol remains in place and hasn't fell once. It is compatible with my Nano
0
0
Report
K
Works Perfectly
The Cioks grip lets me attach my DC7 to my Pedaltrain board snugly and quickly without the need for any drilling. It feels solid and secure, and as such does its job perfectly. An excellent accessory.
0
0
Report
N
Simple and secure mounting solution
Used this to mount my Cioks power supply under the pedalboard and it fits perfectly. Feels solid, holds everything firmly in place and makes the setup look clean. Straightforward solution that does exactly what it is supposed to do.
0
0
Report
N
Does what it's supposed to do
Nothing much to be said here, it keeps the power supply on the board, it will definitely not come off.
The only downside is that the screws will dig into the board and leave nasty marks if you ever want to move the power supply to another spot. Rotating rubber ends on the screws would be a good idea, but maybe that's overengineering a simple thing.
All in all, fixates the PSU without too much hassle.
The only downside is that the screws will dig into the board and leave nasty marks if you ever want to move the power supply to another spot. Rotating rubber ends on the screws would be a good idea, but maybe that's overengineering a simple thing.
All in all, fixates the PSU without too much hassle.
0
0
Report
SP
Fits well and nice on my Pedaltrain Nano plus.
0
0
Report
P
It actually fit with my PT Nano
After reading mixed reviews from various personal experiences regarding the GRIP v2 and the Pedaltrain Nano's compatibility, I bought it as a test. And guess what? It fits. Even though both Cioks and Thomann clearly state that it won't. But, again, this is my personal experience. Either way, useful piece of metal, easy to install and because it's so tight, it will never slip off.
0
0
Report
S
Great
I use this with my Cioks DC7 and different pedaltrain boards and it is just wonderful.
Before I used to drill holes on the board and now with this unit it is so easy and you can move the unit as desired.
Highly recommended.
Before I used to drill holes on the board and now with this unit it is so easy and you can move the unit as desired.
Highly recommended.
0
0
Report
CM
Works as advertised
Quite sturdy, fits my Nano+ and Sol perfectly. Once mounted, the Sol is flush with the pedalboard so there's as much clearance as the feet of the board allow.
0
0
Report
JR
Perfect fit for pedaltrain
I mean, let's be honest, it's a piece of metal, but it does the job of holding my cioks dc7 underneath my pedaltrain snugly. I screwed it on once and haven't thought about it since. It's as simple as it should be.
0
0
Report
JB
Work well.
I use this to mount my Cioks DC7 to my Pedaltrain Metro 20. Good quality piece.
0
0
Report