A
Great addition to power supply
This flex cable is a fantastic addition to any cioks power supply. It's particularly useful when used with a power supply with a smaller number of outputs like the cioks Adam or dc5. As long as the total current draw of the 3 pedals you wish to connect don't exceed the maximum milliamp output from an output of the power supply, this cable will allow you to use them with no issues.
I have not had a single issue with power or noise when using this flex cable.
I have not had a single issue with power or noise when using this flex cable.
1
1
Report
KS
I couldn't live without these daisy-chain cables
Since I purchased my 5-output Cioks DC10 back when I had far less pedals, I now have to power a dozen of pedal off the DC10 ... So I really couldn't have built my current pedalboard without these 3-way daisy chain cables.
1
0
Report
B
solid gear
This is a piece of gear, that was in the first demand for my small pedalboard. I believed it would work with Cioks power supply and I wasn't disappointed. Hardly any signs of usage after hundreds of gigs!
1
0
Report
TS
Perfect for multiple analog pedals
These cables help me get the most out of my CIOKS DC7. They are of great quality, and daisy-chaining low mA analog pedals works great. No noise, no issues whatsoever.
0
0
Report
A
No hiss or any noise
Due to the fact that my CIOKS DC-10 power supply has 10outlets but only 8 outs are isolated I had to consider very well which pedal should connect which output. As I have more pedals (13) then the number of outlets (10) it's not easy to come up with the right solution.
I decided that those pedals which do not necessary require isolalated output should be connected onto one outlet. Therefore I had to have this daisy chain cable. I ended up putting my Ibanez TS-9, DOD 250 overdrive and MXR EVH Phase 90 on this daisy chain. So far so good. There is no hiss or any noise. The cable is sturdy but also flexible enough. The length is divided to 50+30+30cm parts.
I decided that those pedals which do not necessary require isolalated output should be connected onto one outlet. Therefore I had to have this daisy chain cable. I ended up putting my Ibanez TS-9, DOD 250 overdrive and MXR EVH Phase 90 on this daisy chain. So far so good. There is no hiss or any noise. The cable is sturdy but also flexible enough. The length is divided to 50+30+30cm parts.
0
0
Report
B
Good
If you have several pedals that have low current (mA), then there should be no noise issues, at least there is not for me
0
0
Report
A
Does exactly what you'd expect!
bought this cable to allow me to power additional pedals from my Cioks Eventide PowerFactor 2. Doesnt seem to add any noise, so that's all I can ask from it!
Good length too, whih allows for greater coverage on my board.
Good length too, whih allows for greater coverage on my board.
0
0
Report
D
Cioks Quality
Very good product and enough length between connections to use properly
0
0
Report
M
So many 9V plugs off one Cioks power supply...
I have a DC7 power supply from Cioks, this allows me to daisy chain a few analog pedals and free up a few extra plugs for digital effects. Does the job fine.
NOTE: Cioks use an RCA connector on their power supplies, so this likely won't work with power supplies from other companies.
NOTE: Cioks use an RCA connector on their power supplies, so this likely won't work with power supplies from other companies.
0
0
Report
AJ
Great for powering multiple pedals
I use this for my Cioks DC10 to power some less demanding guitar pedals such as my tuner, looper and booster.
It does exactly what its suppose to with suppling stable reliable power to all 3 pedals, as well as making more room for other power outlets as well as great for cable management
I would highly recommend!
It does exactly what its suppose to with suppling stable reliable power to all 3 pedals, as well as making more room for other power outlets as well as great for cable management
I would highly recommend!
0
0
Report
