Behringer System 100 Bundle

Bundle offer comprising

Behringer 112 Dual VCO

  • Eurorack Module
  • Contains two identical analogue VCOs
  • Waveforms: triangle, sawtooth and square/pulse
  • Adjustable pulse width and PWM CV input with attenuator
  • Octave selector and fine-tune control
  • Hard- and soft-sync
  • 3 Pitch CV inputs with attenuators
  • Current consumption: 130 mA (+12 V) / 70 mA (-12 V)
  • Width: 16 HP
  • Depth: 46 mm

Behringer 140 Dual Envelope/LFO

  • Eurorack Module
  • Two independent analogue ADSR envelopes
  • For each envelope: manual trigger button, gate input, fader for attack, decay, sustain and release
  • 2 Signal outputs and inverted output
  • Analogue LFO with 5 waveforms
  • Fader for frequency and delay time
  • Three frequency ranges selectable (0.05 - 30Hz)
  • CV and trigger input and 2 signal outputs
  • Current consumption: 40mA (+12V) / 40mA (-12V)
  • Width: 16 HP
  • Depth: 44 mm

Behringer 121 Dual VCF

  • Eurorack Module
  • Authentic reproduction of the original "System 100M" circuitry
  • 2 Low-pass filters with cut-off frequency and resonance control
  • Each filter has 3 audio outputs and 3 CV inputs with attenuators
  • Each VCF has an additional switchable 3-mode high-pass filter
  • 3-Channel mixer per VCF allows independent mixing of all input signals
  • Current requirement: 40 mA +12 V, 40 mA -12 V
  • Width: 16 HP

Behringer Eurorack 104

  • Eurorack empty housing
  • Compact empty housing for synthesizer modules and accessories in a 3 U format
  • Sturdy aluminium frame with wooden side walls
  • Width: 104 HP
  • maximum depth: 38 mm (1.5")
  • Easy positioning of modules using 52 sliding nuts (included)
  • Large rubber feet are secure and non-sliping on most surfaces
  • Dimensions (W x H x D): 546 x 84 x 133 mm
  • Weight: 1.2 kg
  • Design and development in the UK

Behringer 130 Dual VCA

  • Eurorack Module
  • Analogue 2-channel VCA
  • Per channel: Mixer with 3 adjustable inputs, 3 CV inputs with attenuator, gain control, 2 signal outputs (low/high) and switch between linear and exponential characteristics
  • Current consumption: 30mA (+12V) / 20mA (-12V)
  • Width: 16 HP

Behringer CP1A

  • Power supply module for Eurorack systems
  • Control LEDs for +12 V, -12 V and +5 V.
  • Slots for 2 Flying Bus Boards with 7 slots each
  • Output: 1 A (+12 V) / 1 A (-12 V) / 0.5 A (+5 V)
  • Width: 4 HP
  • Depth: 52mm
  • Includes external power supply unit (13 V DC, 3 A), 2 Flying Bus Boards with 7 slots each

Behringer 150 Ring Mod/Noise/S&H/LFO

  • Eurorack Module
  • Analogue ring modulator
  • Noise generator with two outputs for white noise and pink noise
  • Sample & hold unit with clock out, external clock in and fader for clock rate and lag time
  • Analogue LFO with 5 waveforms
  • Fader for frequency and delay time
  • Three frequency ranges selectable (0.03 - 30Hz)
  • CV and trigger input and 2 signal outputs
  • Current consumption: 60mA (+12V) / 50mA (-12V)
  • Width: 16 HP
  • Depth: 44 mm

2x the sssnake DD1030

  • Patch Cable Set
  • Mini jack mono to Mini jack mono
  • Length: 30 cm
  • Set of 6 cables
Available since July 2020
Item number 499654
Sales Unit 1 piece(s)
7.299 kr
Free shipping incl. VAT
In stock within 6-8 weeks
In stock within 6-8 weeks

This product is expected back in stock soon and can then be shipped immediately.

Standard Delivery Times
1