oc
good rack shelf only a little wide
this is actually a nice rack shelf and the price is excellent. Once mounted it is stable and slides in and out very well. It also has lots of usable space unlike some other rack drawers available.
The only minor problem is that the width across the rails when you include the fixing screws is a little wide to fit into a 19inch rack. it fits... eventually, but you need to angle it to squeeze it in. for me, this meant demounting several units to have enough height to angle the shelf, fit the shelf, then remount the gear I removed... not the end of the world but was a little annoying!
The only minor problem is that the width across the rails when you include the fixing screws is a little wide to fit into a 19inch rack. it fits... eventually, but you need to angle it to squeeze it in. for me, this meant demounting several units to have enough height to angle the shelf, fit the shelf, then remount the gear I removed... not the end of the world but was a little annoying!
0
0
Report
O
Sturdy but spacing of screw holes could be better
Exactly what I was looking for. I use them for effects pedals/stomp boxes and groovebox synths, so they can connect to my patch bay.
Very sturdy but the spacing of the screw holes could be a bit better (using them on a Samson rack with American/larger screws).
Still would recommend though.
Very sturdy but the spacing of the screw holes could be a bit better (using them on a Samson rack with American/larger screws).
Still would recommend though.
0
0
Report
R
This thing is a tank
Very solid shelf. I've only rated it 4 stars because it doesn't pull out all the way and has no means of preventing is from sliding in and out. It needs some kind of locking mechanism to see it securely in for transport and out when I'm using live on stage. It's heavy, built well and will server for many years no doubt.
0
0
Report
C
An excellent choice!
Very good quality, at a price which is half of comparable options. Rails run smooth and quality of materials is notable at this price point. I had been using this on a daily basis for quite some time now and I have nothing to complain about.
Since my rack case is profound, I needed to supplement it with extra long bolts (obviously not provided) but even then the plate retained stability. Fantastic.
Highly recommended from my side, gets the job done
Since my rack case is profound, I needed to supplement it with extra long bolts (obviously not provided) but even then the plate retained stability. Fantastic.
Highly recommended from my side, gets the job done
0
0
Report
S
Very Heavy but Worth it
Used 2 of these in my rack, very sturdy and high quality. only downside is they are heavy.
0
0
Report
J
Decent Sliding Drawer
I fitted this in my Thomann rack.
It's a bit of a pain to fit, if I'm honest. It secures both front and back (make sure your rack has rear rails) which means you need to loosen off the brackets, get the unit half-fitted, partially tighten the brackets so you can get it out again, fully tighten the brackets, then refit it.
Having said that, once fitted it feels sturdy enough. The drawer doesn't lock in place like other, more expensive, units. However, there is sufficient friction in the operation that I don't think you will find the drawer sliding back and forwards whilst in transit.
In summary, a decent quality drawer at a decent price.
It's a bit of a pain to fit, if I'm honest. It secures both front and back (make sure your rack has rear rails) which means you need to loosen off the brackets, get the unit half-fitted, partially tighten the brackets so you can get it out again, fully tighten the brackets, then refit it.
Having said that, once fitted it feels sturdy enough. The drawer doesn't lock in place like other, more expensive, units. However, there is sufficient friction in the operation that I don't think you will find the drawer sliding back and forwards whilst in transit.
In summary, a decent quality drawer at a decent price.
0
0
Report
A
Great Rack Pedalcase
I use this one for my Pedals! I tape my Pedals on it and can pull it out when I will change my settings! But I have a little problem with it. I´m a bassplayer so the vibration causes that the stacker comes out time for time. But this is not a huge problem for me..it do what it builds for, so that is enough for me.
The quality of this product is awesome! You can pull it out very easy the rolls are very good and the plate is made of solid metal. My rack has two rail, one behind and one in front of it, so I can fix the rail on both sides which is good because it doesn´t go down and scratch on my Amp when its heavely loaded!
The quality of this product is awesome! You can pull it out very easy the rolls are very good and the plate is made of solid metal. My rack has two rail, one behind and one in front of it, so I can fix the rail on both sides which is good because it doesn´t go down and scratch on my Amp when its heavely loaded!
0
0
Report
A
Good quality, and works as it should. Thogh I wish there was one that has a bit less of a depth, or that you could change it, Cause I have a rack that has less depth than standard, and this doesn't fit in there.
0
0
Report
D
Very nice and sturdy but...
Very nice and sturdy but missing a lock mechanism so it wouldn't open when tilted.
0
0
Report
A
Good value
This tray is really sturdy, I used it with a rack case to make a (vocal) pedal board ready to be deployed anywhere. My only slight complaint is that sometimes it won't close all the way, but I suspect it depends on the placement of the case.
0
0
Report