K
Excellent Case / Perfect Fit / Great Value / Superb Protection!!!
I purchased the DP-32 and wanted a quality case to protect it. I looked at a number of cases and most were generic, "kind of fit" cases. To get a custom made hard side case was wicked expensive! This was the only case that was a perfect fit with exquisite protection. And the price (including shipping) was actually less than some of the soft sided cases out there.
The shipping was superfast (to the USA). Everything was well packed and it arrived in excellent condition. Once I unpacked it and put my DP-32 in it - it was perfect! The quality of this case and the materials they use are amazing!
Anyone who has the DP-32 or the older DP-24 would be crazy not to get this case!
The shipping was superfast (to the USA). Everything was well packed and it arrived in excellent condition. Once I unpacked it and put my DP-32 in it - it was perfect! The quality of this case and the materials they use are amazing!
Anyone who has the DP-32 or the older DP-24 would be crazy not to get this case!
6
0
Report
R
Thon Brilliance
Bought for my DP-24 after reading the positive rewiews here on Thomann.
This case really fits like a glove around the DP-24 and also has a great build quality from what I can tell. It appears that it's plywood with something close to a smooth fiberboard outer finish which seems like it should be durable.
The aluminium parts of the case are fitted well and the latches have a nice positive feel to them. It's a well thiught out case and at this money you simply cannot go wrong, there's even room left under the mixer case to store the power cable (or your sandwiches) while on the move.
A truely excellent case which should last a lifetime.
This case really fits like a glove around the DP-24 and also has a great build quality from what I can tell. It appears that it's plywood with something close to a smooth fiberboard outer finish which seems like it should be durable.
The aluminium parts of the case are fitted well and the latches have a nice positive feel to them. It's a well thiught out case and at this money you simply cannot go wrong, there's even room left under the mixer case to store the power cable (or your sandwiches) while on the move.
A truely excellent case which should last a lifetime.
4
0
Report
J
Good case
Being used to ABS road cases, I am not a fan of the exterior finish - the brownish tinge and the look of a thin film with microscopic bubbles - but that is irrelevant. What counts is that it holds together and that it protects the contents.
This case, as with the Axiom case I ordered from Thomann, is a great value. A competing ABS-clad road case would cost nearly twice as much but I would be getting less bang for the buck. It is sturdy and well-built.
Having had both cases for a while now, I'm satisfied that they will hold up, so I am ordering a third Thon case, this time for my Montage 8.
Note that I have been buying road cases since 1982 and (as long as you do not count the exterior surface material) the Thon cases are the best I have found for the price. I recommend them.
This case, as with the Axiom case I ordered from Thomann, is a great value. A competing ABS-clad road case would cost nearly twice as much but I would be getting less bang for the buck. It is sturdy and well-built.
Having had both cases for a while now, I'm satisfied that they will hold up, so I am ordering a third Thon case, this time for my Montage 8.
Note that I have been buying road cases since 1982 and (as long as you do not count the exterior surface material) the Thon cases are the best I have found for the price. I recommend them.
0
0
Report
E
Sturdy stuff
The usual prompt and efficient service from Thomann. The product is very good and I'm really confident about the protection it gives my Tascam recorder when carrying it around
0
0
Report
A
Excellent case
I bought this case for a DP-24. It will also fit the -32 and SD variants. Given I am transporting the unit to rehearsals and gigs I wanted something solid to move it around in, and this case is perfect. There are no downsides to it in my view.
The DP-24 sits in the base of the unit in use, giving it some extra security. For storage and transport, the cutout below the recorder has room for a set of headphones, the power supply, RC-3F remote pedal, the manual, and a plastic sleeve of tracking sheets (invaluable!).
The build quality is spot-on and I'm sure would handle drops and spills without compromising the contents (I hope not to test this, all the same).
I guess no-one really likes spending money on cases, but all the same the cost is very reasonable: I was looking at semi-rigid cases for around £80 until I found this (which was around £110 including shipping). The extra £30 is really money well spent.
I'm also really impressed with Thommann's customer service. I'm in the UK and the unit arrived very quickly. I missed the boat on adding the RC-3F pedal to my order because Thommann had processed it so quickly, but rather wonderfully they offered to supply the pedal on a separate order for zero shipping! (Didn't need to take this up as I'd bought it locally by then). So thanks guys.
The DP-24 sits in the base of the unit in use, giving it some extra security. For storage and transport, the cutout below the recorder has room for a set of headphones, the power supply, RC-3F remote pedal, the manual, and a plastic sleeve of tracking sheets (invaluable!).
The build quality is spot-on and I'm sure would handle drops and spills without compromising the contents (I hope not to test this, all the same).
I guess no-one really likes spending money on cases, but all the same the cost is very reasonable: I was looking at semi-rigid cases for around £80 until I found this (which was around £110 including shipping). The extra £30 is really money well spent.
I'm also really impressed with Thommann's customer service. I'm in the UK and the unit arrived very quickly. I missed the boat on adding the RC-3F pedal to my order because Thommann had processed it so quickly, but rather wonderfully they offered to supply the pedal on a separate order for zero shipping! (Didn't need to take this up as I'd bought it locally by then). So thanks guys.
0
0
Report
s
Provides a perfect fit to the X1222usb mixer. It is well constructed and has protected it for many years of use.
0
0
Report
J
Heavy duty
With the Tascam dp32 inside the case makes it quite heavy, but i would have it no other way. This thing feels indestructible, hence serving its purpose of safeguarding my recording mixer, flawlessly.
0
0
Report
M
Superbly Crafted
These Thon cases are superbly crafted with foam cavity's for associated cables and at such a low price you will not find a better deal anywhere.
I have just ordered another bespoke case for my vintage mini-moog as well as one for my MPC4000. I am genuinely impressed with the quality and price.
I have just ordered another bespoke case for my vintage mini-moog as well as one for my MPC4000. I am genuinely impressed with the quality and price.
0
0
Report
B
Excellent quality
This case is a 'must have' item if you own a Tascam DP-24 OR 32. The fit is perfect and the build quality is excellent, and to top it all, the one that arrived was black!! which looks much better the the brown case that's pictured.
Buy one, you will not regret it.
Buy one, you will not regret it.
0
0
Report
rj
Thon Mixercase
Excellent product, the Tascam DP-24 fits snugly and securely, well made and really impressed!
0
0
Report