A
Decent daisy chain
I ordered this daisy chain to power three overdrive pedals and some other things, if necessary. I use it with a Voodoo Lab ISO-5. The quality of the components seems OK, but not exactly high-end. The L-jacks are fairly durable and aren't too big, which is an advantage for me. They're about the same size as the jacks that come with the Voodoo Lab power cables. The length of the cable between the power jacks is also quite large, a bit too large for my needs. All in all, a decent daisy chain.
1
0
Report
a
Good product
I have to trim some plastic out on the tips because they were not fitting the pedal. Or the minimal movement will turn it off. After that they were working just fine, Enough room between pedals.
0
0
Report
A
Good Daisy Chain for the money
Im using this daisy chain conector with my Visual Sound 1Spot, works as intended, it can add a little bit of noise to the signal, but nothing to worry about.
The length of the cable between the power jacks is quite large, i find an issue that if you aren't using all the connectors there is no plastic cover for the jacks, maybe that's one of the issues that it add a little bit of hum.
Apart from that good quality for your money.
The length of the cable between the power jacks is quite large, i find an issue that if you aren't using all the connectors there is no plastic cover for the jacks, maybe that's one of the issues that it add a little bit of hum.
Apart from that good quality for your money.
0
0
Report
A
Helpful daisy chain
The Palmer MI PWC 6 daisy chain is a helpful tool, keeping your pedal-board tiny. Most effects pedal?s power consumption is quite low, allowing to connect a couple of them to a simple compact power supply by using this gadget. Angled connectors are additionally helpful in achieving this result. Most of us do not really need a ?tank? under their pedal-board for supplying their whole battery of boss-style effects.
Compared to competitor's products, this is more rugged and hopefully will last for a while. In conjunction with a noiseless power supply, no negative side effects have been observed up to now. Connecting a couple of pedals with 9V 5.5mm/2.1mm. negative centre to a hum-free Danelectro compact power supply worked fine for a while now.
Compared to competitor's products, this is more rugged and hopefully will last for a while. In conjunction with a noiseless power supply, no negative side effects have been observed up to now. Connecting a couple of pedals with 9V 5.5mm/2.1mm. negative centre to a hum-free Danelectro compact power supply worked fine for a while now.
0
0
Report
A
Does what's needed
Handy daisychain. I've been contantly gigging with this and it has survived so far with all plugs working. I am impressed as I am always apprehensive about the quality of cheaper items.
0
0
Report
m
Simple set of connectors - nothing special
Set of connectors. Nothing special, everything works and is built well.
0
0
Report
w
Used this to daisy chain my effects pedals
I bought this when I had to daisy chain my effects pedals with a little 1-spot power supply. It did do the job without problems. It's cheap enough to choose it instead of other options, and the construction of the plugs seems quite good. I guess that if you use this with care, it should work for you without many complaints
0
0
Report
CS
works
I am using the daisy chain with my home pedal board (pedaltrain nano) and it just works. Not much more to say. For home use the cable is a bit long for me - but that is not a problem at all.
0
0
Report
MF
Serves its propose
Cables are long enough. Plugs are OK
0
0
Report
P
Palmer MI PWC 6
I use this little helper to power five pedals with one output on my power-supply. You might experience some humming problems, but in my current setup it works really fine. One extra point for this daisychain are the angled plugs, so they require less room on the board.
0
0
Report
