To the page content

Monitoring Plugin (Download)

  • Enables precise listening to stereo, surround and immersive formats up to Dolby Atmos via headphones without a physical speaker setup
  • Creates a real measured reference room with a defined speaker arrangement
  • Precise bass and transient reproduction for clear playback of all channels
  • Supports formats such as stereo, 5.1, 7.1, 7.1.2 and 7.1.4
  • Head tracking via OSC with full response to head movements
  • Expandable ambience component for a flexible sense of space
  • Peak-controlled output to prevent clipping
  • Bypass with adjusted loudness for direct comparability
  • Solo and mute functions for focused review of individual levels
  • Optional stand-alone operation on macOS without DAW
  • Matched to Neumann NDH 20 and NDH 30 headphones
  • High and low shelf EQs for fine-tuning the sound
  • Adjustable wet/dry ratio
  • Automatic adjustment to individual head geometry via interaural time differences
  • Based on a real referenced Neumann setup with KH Line, MA 1, KU 100 and MT 48
System Requirements
  • Version: 1.5
  • Shipping Format: E-Mail
  • License validity: perpetual
  • Copy Protection: Online Activation
  • Simultaneous Activations: 1
  • Windows: from 10 (64-Bit)
  • Mac OS (64 Bit): from 10.15
  • CPU min.: AMD Multicore, Apple Silicon, Intel Core
  • CPU compatibility: Apple Intel, Apple Silicon, Windows AMD, Windows Intel
  • Display: 1024 x 768
  • add. System requirements: Internet Connection for Installation and Activation
Supported Formats
  • AAX native 64-Bit
  • AU 64-Bit
  • VST3 64-Bit
  • Available since June 2025
  • Item number 619443
  • Sales Unit 1 piece(s)
  • Los artikel / bundelartikel Los artikel
  • Delay No
  • Dynamics No
  • Effect Filter No
  • Encoder/Decoder No
  • Equalizer No
  • Guitar amps/-effects No
  • Channel Strip No
  • Metering / Analysis / Correction No
  • MIDI-FX No
  • Modulation Effects No
  • Multieffect / Plugin-Host No
  • Overdrive/Distortion No
  • Preamp / Saturation No
  • Psychoacoustic tool / Enhancer / Exciter Yes
  • Restauration No
  • Reverb Yes
  • Special FX No
  • Summer / Mixing Consoles No
  • Tape Simulation No
  • Pitch Shifter / Harmonizer / Timestretching No
  • Transient Processing No
  • Vocoder / Vocal effect No
  • Mastering Tools Yes
  • Hardware Controller No
  • Download Yes
1.099 kr
incl. VAT
Available immediately

4 Customer ratings

4.3 / 5

handling

features

sound/quality

computer utilisation

4 Reviews

google translate de
Unfortunately there was an error. Please try again later.
MG
Perfekte Ergänzung zu den Neumann Headphones
Mike GT 11.02.2026
RIME bietet eine sehr gute Simulation von Surround Mixes. Tatsächlich funktioniert die Anwendung auch mit "nicht Neumännern", das Ergebnis ist dann aber - je nach Kopfhörermodell - natürlich nicht immer perfekt.
In Verbindung mit dem Neumann NDH 30 entfaltet RIME sein volles Potential, und bildet räumliche Produktionen ziemlich nah am echten Surround ab - wenngleich für mich persönlich der echte Raumklang dann eben doch - naturbedingt - realistischer klingt. Für unterwegs oder in Räumen die nicht akustisch optimiert sind, ist das Ganze aber eine perfekte Lösung!

Auch Stand Alone ist der Betrieb möglich, die Konfiguration ist allerdings - je nach verwendetem Interface - etwas umständlich. In der Regel muss ein "Aggregate Device" gebildet werden, damit es keine Sound Drifts gibt. Hier könnte vielleicht softwaretechnisch noch etwas nachgebessert werden!? Daher ein Stern Abzug für die Bedienung.

Super ist, dass man RIME kostenlos von der Neumann Website herunterladen kann und es dann für einen gewissen Zeitraum live testen kann - also bei Interesse einfach risikofrei ausprobieren, das sagt mehr als jede Bewertung ;-)!
features
handling
sound/quality
computer utilisation
3
0
Report

Report

google translate es
Unfortunately there was an error. Please try again later.
L
Manuel Duque
Leirum123 03.06.2026
La mejor opción para monitorizar en Binaural una mezcla Dolby Atmos 7.1.4 o simplemente tu canal Stereo si tienes los cascos.
features
handling
sound/quality
computer utilisation
1
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
R
Gutes aber teures Wellnes für die Ohren
R&B 06.09.2026
Gleich vorweg, ich nutze RIME nur STEREO. Ich besitze die NDH30 Kopfhörer sowie eingemessene Neumann Monitor Lautsprecher und bin von der relativ identischen Signal Abbildung aus beiden Quellen begeistert. Was ich jedoch irgendwie störend empfand, war das einen Hauch zu „intime“ Hörgefühl über Kopfhörer. Ja Crossfeed hatte ich auch schon getestet, hatte mich aber nicht 100 % überzeugt. Also hatte ich RIME zunächst testweise probiert, und „Hossa“ was soll ich sagen, es klang nach etwas Anpassung plötzlich als säße ich ohne Kopfhörer vor meinen Monitorlautsprechern und zwar Alles, Winkel, Abstand und Raum. Das Tool lässt sich auch fein einstellen , was ich sehr schätze. Ich mag keine färbenden Eingriffe in den Signalweg und RIME schafft es, ohne klangliche Veränderungen, auf subtile Weise eine Atmosphäre zu schaffen, welche meiner Abhörsituation mit meinen Monitor Lautsprechern gerecht wird. Ich habe das Tool dann auch mit anderen Kopfhörer-Herstellern probiert und muss auch hier sagen, es kann Funktionieren, wenn auch nicht ganz so perfekt wie mit dem NDH30.
Was ich jedoch etwas kritisiere, ist der Preis von knapp 100 Euro. Ich bin der Meinung, Neumann sollte das nochmals überdenken und zumindest für NDH20/30 Kunden, RIME rabattiert anbieten. Gekauft habe ich es trotzdem und bereue es bisher nicht. Möchte aber jedem raten es im Vorfeld mit der 14 Tage Testversion zu probieren.
features
handling
sound/quality
computer utilisation
0
0
Report

Report