S
Will definitely do the job
I wanted a minimalistic pedalboard with a few (albeit large) pedals for my bass rig.
+ The carpet seems to bind with the provided velcro well, the velcro tape hasn't come off any of my pedals except for one, so it's clearly the pedal's rubber bottom's fault.
+ Fits my Harley Benton PowerPlant ISO-5 Pro with room to spare, there's enough height to even tilt the power supply downwards to make room for straight power cable ends.
+ The bag fits some extra cables and other stuff if you need it.
+ When opened, the bag's rim is short enough to play the board straight out of the bag, which I do most of the time.
- Unlike in the picture, where the carpet is nicely tucked under the side beams, my unit came with the top row's left side attached over the top of the beam. I'm afraid it might come off from that side in the future, but I'll see how it goes. Currently it's not a problem.
Overall I'm happy with this as my first pedalboard, the product description is accurate enough that my planned pedal layout actually fits.
+ The carpet seems to bind with the provided velcro well, the velcro tape hasn't come off any of my pedals except for one, so it's clearly the pedal's rubber bottom's fault.
+ Fits my Harley Benton PowerPlant ISO-5 Pro with room to spare, there's enough height to even tilt the power supply downwards to make room for straight power cable ends.
+ The bag fits some extra cables and other stuff if you need it.
+ When opened, the bag's rim is short enough to play the board straight out of the bag, which I do most of the time.
- Unlike in the picture, where the carpet is nicely tucked under the side beams, my unit came with the top row's left side attached over the top of the beam. I'm afraid it might come off from that side in the future, but I'll see how it goes. Currently it's not a problem.
Overall I'm happy with this as my first pedalboard, the product description is accurate enough that my planned pedal layout actually fits.
3
1
Report
P
Fine
This is my first pedalboard and I wanted something portable and that would allow me some variety at the same time it would limit my fancy. I've used it so far at home and at band rehearsals.
The pedalboard is compact and light but it with 8 pedals (8 boss size, 2 small size) it can become a bit heavy, so I am feeling more comfortable taking a trolley for transporting it for longer than 10 minutes.
It is as well sturdy.
One of the rubber feet came a bit short of perfect and it sunk just enough for the pedalbord to bounce a bit so I had to do a slight diy fix.
The power supply Harley Benton iso-1 does not quite fit in the space underneath so you have to put it on top, find a mcgyver way out of it or get a pedalboard/power supply combination that fits straight away.
The pedalboard is compact and light but it with 8 pedals (8 boss size, 2 small size) it can become a bit heavy, so I am feeling more comfortable taking a trolley for transporting it for longer than 10 minutes.
It is as well sturdy.
One of the rubber feet came a bit short of perfect and it sunk just enough for the pedalbord to bounce a bit so I had to do a slight diy fix.
The power supply Harley Benton iso-1 does not quite fit in the space underneath so you have to put it on top, find a mcgyver way out of it or get a pedalboard/power supply combination that fits straight away.
2
2
Report
M
Incredible Pedalboard for such a small price
It's a great aluminum pedalboard, have some screws that can be adjusted for a better Power Supply fit and nowadays they give you some longer screws and washers so you can adjust the feet height to better fit power supplies.
I could comfortably fit 6 pedals (only 1 mini sized) with a Caline power supply underneath.
The included carrying bag is incredibly well made and looks sturdy. Don't have a single reason to complain about it.
I could comfortably fit 6 pedals (only 1 mini sized) with a Caline power supply underneath.
The included carrying bag is incredibly well made and looks sturdy. Don't have a single reason to complain about it.
4
0
Report
B
Betaalbare topkwaliteit
Als bassist heb ik weinig pedalen nodig, maar die ik heb, wil ik graag goed geregeld hebben.
Dit pedal board komt compleet met gemakkelijk te verwerken klittenband en een tas met extra vak voor snoeren, band etc.
Hij is mooi bekleed, houdt zich goed op de vloer en is sterk genoeg.
Zeer betaalbaar en fijne kwaliteit. Vol vertrouwen mee de bühne op!
Dit pedal board komt compleet met gemakkelijk te verwerken klittenband en een tas met extra vak voor snoeren, band etc.
Hij is mooi bekleed, houdt zich goed op de vloer en is sterk genoeg.
Zeer betaalbaar en fijne kwaliteit. Vol vertrouwen mee de bühne op!
0
0
Report
i
Almost perfect
It's a great pedalboard for the price! The bag is good and it comes with handy accessories, including velcro and rubber bands. The only downsize is its height, it's simply too low to accommodate a common power supply, namely Harley Benton ISO.
0
1
Report
L
So and so...
It is not a bad quality product at all but the design is not amazing. You are supposed to install your PSU under the pedal board but there is no room. I bought a Harley Benton power supply and it fits by miracle if I use the angled side of the various power cables. Buy Harley Benton, but get a larger pedal board.
0
0
Report
M
Simple and sturdy
I have used this pedal board for a couple of months now. With six pedals of various sizes. I love that it completely fits in the bag, and sometimes I don't even take it out. Just zip it open, plug in and play. The construction is very sturdy and the pre-taped velcro holds well. Thanks!
0
0
Report
N
Great travel rig
I am a simple player and i mainly use an overdrive, boost, delay and reverb. Sometimes i play with modulations and other effects. All the pedals above fit the board nicely and i would say the board is big enough for 7-8 mini effects and 4-5 chunky pedals. The size is very travel friendly and the bag that is included is built nicely.
At this moment on the board i have: quilter superblock uk amp, harley benton custom line delay, flamma fs02 reverb, joyo tauren overdrive and tc electronic cinders overdrive. It is a snug fit but it all works fine and i have everything that i need.
At this moment on the board i have: quilter superblock uk amp, harley benton custom line delay, flamma fs02 reverb, joyo tauren overdrive and tc electronic cinders overdrive. It is a snug fit but it all works fine and i have everything that i need.
1
0
Report
AS
Good quality and great value
So far so good. The pedalboard seems well made as does the soft case. I am mainly using this at home but hope to use it for gigs in the near future. I like the fact is is adjustable with regards to one of the bars and also the height of the feet. The Velcro tape seems to stick well. Highly recommended. The Harley Benton power supply I purchased fits underneath it easily- it seemed strange to me that Thomann didn’t flag this up as an ideal pairing but instead recommended a more expensive big brand power supply..
0
0
Report
Pv
functional and cheap- I like it!
NOTICE - the rubber feet might discolour wooden floors if you leave the board out for extended periods of time.
Great option for small fly rigs. The bag is sturdy and looks nicer IRL than I expected. The board itself if sturdy and reasonably flexible. I would have liked the option to place it at an angle, which seems to be possible with parts from a hardware store.
In my mind the board could have been a few centimetres less deep, since the current depth is not nearly enough for two rows of pedals, but overkill for a single row.
If you get this board, don't forget to order the ultra flat patch cables that EBS and Harley Benton make. They will save you precious centimetres and avoid unsightly cable loops sticking out, especially if you're using the nano-style pedals.
Great option for small fly rigs. The bag is sturdy and looks nicer IRL than I expected. The board itself if sturdy and reasonably flexible. I would have liked the option to place it at an angle, which seems to be possible with parts from a hardware store.
In my mind the board could have been a few centimetres less deep, since the current depth is not nearly enough for two rows of pedals, but overkill for a single row.
If you get this board, don't forget to order the ultra flat patch cables that EBS and Harley Benton make. They will save you precious centimetres and avoid unsightly cable loops sticking out, especially if you're using the nano-style pedals.
0
0
Report