B
Nice Light
Used Two of these on my Allen and heath QU32 Nice and bright and could Direct them anywhere, feels like they have been well made and a very good price point. would recomend these for shows when its very dark at FOH.
2
0
Report
Kk
Finally good gooseneck lamp for my X32 mixing desk. I have one with 3 pin XLR but this one not long enough.
1
0
Report
A
Stairville LEDXLR4A MKII
I bought this lamp for X32 mixer but i recomend it for any mixer! It has a very bright leds and flexible neck for all way positioning! 4 pin connector can be easily turned for all mixer types! Highly recomended!
1
0
Report
C
Stairville LEDXLR4A MKII
Fabulous item.
Works very well on my Midas and a lot cheaper than the original ones.
Highly recommended.
Works very well on my Midas and a lot cheaper than the original ones.
Highly recommended.
1
0
Report
w
Perfect for qu16
Bought this to use with Allen and Heath qu 16 series mixing desks due to high price of branded ones.
Works perfectly with it, good 4 pin correctly wired connector with enough length on the gooseneck and very decent white led light output which makes for a clear mixing area.
Lamp detaches from the gooseneck so don't lose it.
Would recommend to others.
Works perfectly with it, good 4 pin correctly wired connector with enough length on the gooseneck and very decent white led light output which makes for a clear mixing area.
Lamp detaches from the gooseneck so don't lose it.
Would recommend to others.
0
0
Report
A
Good Sturdy Light
I've used this light for about a year now. The first thing I noticed was that it was a good sturdy build quality. I like the way it swivels at the top. However I found the beam spread to be too narrow as it only lights a small portion of my desk at a time. It could also benefit from a warmer colour led as it's quite blue.
The design of the swivel head is also a design weakness as the head is attached using a barrel jack so it can swivel and it now seems to have come off and been lost! This wouldn't be an issue if the desk was an installation but with constant moving around and unplugging the light the head part could easily fall off. However at the price I would still buy it again!
The design of the swivel head is also a design weakness as the head is attached using a barrel jack so it can swivel and it now seems to have come off and been lost! This wouldn't be an issue if the desk was an installation but with constant moving around and unplugging the light the head part could easily fall off. However at the price I would still buy it again!
0
0
Report
A
Quality lamp for X32
Bought this for use with my Behringer X32 Compact. Works perfectly, generally have it zoned around the right bank of 8 faders for most of the gig, but can be risen for a wider spread of light. Excellent quality, connector has a good solid fit, the gooseneck is sturdy and the lamp works out of the box.
0
0
Report
N
I needed light, it delivered.
I recently bought the great and well spec'd Behringer X32 Compact from Thomann. Even though it has so many features, a lamp it does not. So I made sure to purchase this fine LED light. I did a little research and found this one to work with the X32 (not all lights do, even with a 4 pin configuration). This is a well made light so far. As with LEDs, the light is 'whiter' than the more traditional bulb, which I like. The X32 allows me to dim the light, setting it to the level I am after. This is great buy, I hope it's longevity stands up to it's initial abilities!
1
0
Report
R
Great light - 4 pin for Yamaha MGP 24X mixer
Great light for my Yamaha MGP 24X mixer. Sometimes can't see very well in the dark at some gigs and this is great. With the flexible Swan neck it is very versatile you can sweep to see the back inputs clearly then back over the desk once all plugged in. The lamp feels very good quality and fits the mixer fantastic. Wasn't sure it was OK for my mixer but works brilliant. Highly recommended
0
0
Report
W
Low spread of light
I use this with a qu24 desk and it throws a small pool of light around the size of a dinner plate so constantly moving the gooseneck to light the areas I need, having said that the gooseneck is still in good shape so build must be good
0
0
Report