Sonarworks SoundID Ref Spk & HP w Mic

120

Reference for speakers and headphones with measurement microphone (box)

  • Speaker and headphone calibration software and measurement microphone in a bundle
  • Precise adjustment of the frequency response to get flat and neutral sounding monitor speakers or headphones
  • Enables a more precise evaluation of recordings and mixes
  • Room analysis and automated calculation of the room size based on several measurements
  • Audio calibration engine allows for accurate processing
  • Save an unlimited number of calibration profiles for monitor speakers
  • Comes with headphone calibration profiles for more than 280 supported models
  • Target curve custom adjustments in real time
  • Translation check simulates over 20 different devices and device types for accurate mix translation results
  • 3 filter modes to choose from: Zero Latency, Mixed and Linear Phase allow to optimize filter quality and latency according to the monitoring situation
  • Additional processing controls for Mono, Dry/Wet and Safe Headroom
  • App only: MIDI mapping for various controls and user presets for predefined output device/channel pair combinations
  • Measurement microphone with a pre-polarized electret-condenser capsule
  • Frequency response: 20 - 20.000 Hz with calibration curve
  • Omnidirectional polar pattern
  • Sensitivity: 14 mV/Pa
  • Self noise: 24 dB
  • Signal to noise ratio: 70 dB
  • Dynamic range: 106dB
  • Maximum sound pressure level: 132 dB SPL
  • Requires 48 V phantom power
  • Connector: 3 pin XLR
  • Microphone calibration file for 30° off-axis measurements in Sonarworks software native format to be used with SoundID Reference
  • Microphone calibration file for 0° on-axis measurements in .txt format
System Requirements
  • Shipping Format: Box without Data Storage
  • License validity: perpetual
  • Copy Protection: Online Activation
  • Simultaneous Activations: 3
  • Windows: from 10 (64-Bit)
  • Mac OS (64 Bit): from 10.14
  • add. System requirements: Internet Connection for Installation and Activation, calibr. Headphone
Supported Formats
  • Stand-Alone-Software
  • AAX native 64-Bit
  • AU 64-Bit
  • VST2 64-Bit
Available since March 2021
Item number 515340
Sales Unit 1 piece(s)
Los artikel / bundelartikel Los artikel
Delay No
Dynamics No
Effect Filter No
Encoder/Decoder No
Equalizer No
Guitar amps/-effects No
Channel Strip No
Metering / Analysis / Correction Yes
Modulation Effects No
Multieffect / Plugin-Host No
Overdrive/Distortion No
Preamp / Saturation No
Psychoacoustic tool / Enhancer / Exciter No
Restauration No
Reverb No
Special FX No
Summer / Mixing Consoles No
Tape Simulation No
Pitch Shifter / Harmonizer / Timestretching No
Transient Processing No
Vocoder / Vocal effect No
Mastering Tools Yes
Hardware Controller No
Audio Tool 1
Compatible To PC 1
Mac compatibility 1
Show more
2.549 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

120 Customer ratings

4.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

sound/quality

computer utilisation

84 Reviews

m
I don't know how I have lived without this...
miguel.loff 07.12.2021
... Until now. It completely transformed the sound of my (mostly untreated) room, which I use mainly for listening. The setup is very intuitive, and the results are game changing. I won't be able to go back after this.
handling
features
sound/quality
computer utilisation
2
0
Report

Report

i
very satisfied
itamar 28.02.2023
this product has made a significant improvement in the acoustic sound in my room. As someone who is passionate about music and sound quality, I was constantly searching for ways to enhance my listening experience, and the Sonarworks did not disappoint.

The product is incredibly easy to set up and use, with a simple calibration process that took only a few minutes. After calibrating, I immediately noticed a difference in the sound quality of my speakers and headphones. The SoundID Ref was able to identify and correct any acoustic issues in my room, resulting in a more accurate and balanced sound. The difference was particularly noticeable when listening to music with a lot of instruments and complex soundscapes.

Furthermore, the kit comes with a microphone that can be used to calibrate the sound on other devices, such as my phone or laptop, which has been extremely helpful for my work as a music producer.

Overall, I highly recommend this product to anyone looking to improve the acoustic sound in their room. It is an affordable and effective solution that has made a significant impact on my listening experience.
handling
features
sound/quality
computer utilisation
0
0
Report

Report

A
Elevate Your Audio Experience with Sonarworks SoundID Ref Spk & HP with Mic: A User's PerspectiveMy Honest Review
Anonymous 31.05.2023
Introduction:
As an avid music lover and amateur audio enthusiast, I was constantly searching for a way to improve the quality of my listening experience. That's when I came across the Sonarworks SoundID Ref Spk & HP with Mic—an audio calibration system that promised to revolutionize the way I perceive sound. Intrigued by the possibility of achieving precise and accurate audio reproduction, I decided to give it a try. Here's my experience from a user's perspective.

Unveiling the Package:
Upon receiving the Sonarworks SoundID Ref Spk & HP with Mic package, I was impressed by its sleek and compact design. Opening it revealed a measurement microphone, USB dongle, and software. The microphone felt sturdy and well-built, instilling confidence in its ability to capture accurate acoustic data. I eagerly connected the dongle and installed the software, ready to embark on my audio calibration journey.

Simple and Intuitive Calibration Process:
The software's user-friendly interface guided me through the calibration process effortlessly. It prompted me to set up the measurement microphone in different positions within my room, capturing the unique acoustic characteristics. The step-by-step instructions were clear and concise, ensuring that even a novice like me could easily understand and follow along. The software then analyzed the collected data and applied corrective measures to compensate for any room-induced audio imperfections.

A Sonic Transformation:
Once the calibration process was complete, I eagerly played my favorite tracks to test the results. The difference was immediately noticeable. The audio had transformed into a more balanced and detailed representation of the music. The soundstage widened, and I could pick up nuances and subtle details that were previously lost in the mix. Vocals sounded more transparent, and instrument separation became more pronounced. It was as if a veil had been lifted, revealing a newfound level of clarity and accuracy.

Tailored for Different Playback Systems:
One of the standout features of the Sonarworks SoundID Ref Spk & HP with Mic is its compatibility with both studio monitors and headphones. As someone who enjoys both mixing music on my studio monitors and immersing myself in private listening sessions with my headphones, this flexibility was a game-changer. The system provided specific profiles for my headphones, ensuring that the audio calibration was precisely tailored to their characteristics. No matter which playback system I used, the Sonarworks SoundID Ref Spk & HP with Mic consistently delivered an exceptional audio experience.

An Enhanced Journey Through Sound:
Using the Sonarworks SoundID Ref Spk & HP with Mic has transformed my audio journey. Whether I'm analyzing intricate production details or simply enjoying my favorite music, the precision calibration has elevated my listening experience to new heights. I find myself discovering nuances and subtleties in songs that I had never noticed before. It has truly opened my ears to a whole new world of sonic enjoyment.

Conclusion:
From a user's perspective, the Sonarworks SoundID Ref Spk & HP with Mic is a remarkable tool for anyone seeking to enhance their audio experience. Its simple calibration process, compatibility with different playback systems, and exceptional sound quality make it a valuable investment. Whether you're a music producer, audio engineer, or a passionate listener like myself, this system offers an unparalleled level of precision and accuracy that will redefine how you perceive and enjoy sound.
handling
features
sound/quality
computer utilisation
0
0
Report

Report

y
Perfect
yeserguitar 28.10.2022
It solved a lot of my problems!!! You cannot replace this with an acoustic treatment, that would be an illusion. Also even in the best case with CPU and minimal usage of plugins, you'll get latency. So please use it all the time on your listening, mixing, mastering, etc. but you'll need treatment for tracking and in general. I got a lot of bass problems and Sound ID solved them, plus peaks and reductions on the mid/high-mid section are much clear!
handling
features
sound/quality
computer utilisation
1
0
Report

Report

YouTube on this topic