Harley Benton Dullahan-FT 24 Roasted IB

Headless Electric Guitar

  • Ergonomically shaped alder body
  • Bolt-on neck: Roasted Canadian flamed maple
  • Roasted maple fretboard
  • Fretboard inlays: Black offset dots
  • Neck profile: Modern C
  • Fretboard radius: 350 mm
  • Scale: 648 mm
  • Nut width: 42 mm
  • Graph Tech TUSQ XL nut
  • 24 Stainless steel jumbo frets
  • Pickup: Roswell HAF-B-BK AlNiCo-5 (bridge) and Roswell HAF-N-BK AlNiCo-5 (neck) humbuckers
  • Controls: Master Volume and Master Tone
  • 5-Way switch: Bridge humbucker, neck and bridge single coils, neck and bridge humbucker, neck humbucker parallel, neck humbucker
  • Ex-factory stringing: .010 - .046
  • Black hardware
  • Colour: Ice Blue Gloss
  • Gigbag included

Further Information

Colour Blue
Soundboard Alder
Fretboard Roastet Maple
Frets 24
Scale 648 mm
Pickup System SS
Tremolo No
Incl. Case No
Incl. Gigbag No

These are other customers' choices:

Customers who looked at this item have bought these:

Harley Benton Dullahan-FT 24 Roasted IB
48% bought this exact product
Harley Benton Dullahan-FT 24 Roasted IB
Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
NOK 4,399 Add to Basket
Harley Benton Dullahan-FT 24 BKS
23% bought Harley Benton Dullahan-FT 24 BKS NOK 3,799
Harley Benton Dullahan-AT 24 TBK
13% bought Harley Benton Dullahan-AT 24 TBK NOK 3,666
Harley Benton HB JA-60 OW
2% bought Harley Benton HB JA-60 OW NOK 1,399
Fender Squier Bullet Mustang HH IMPBL
1% bought Fender Squier Bullet Mustang HH IMPBL NOK 1,159
Our most popular Alternative Design Guitars
2 Customer Ratings:
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 /5
  • features
  • sound
  • quality
Total
features
sound
quality
Still the best budget headless, but with flaws
Mojojojoe, 14.09.2020
This will be a long, nit-picky review, here is a quick summary for busy people:
It's the best budget option in the headless category for sure, but it's still a value guitar with knockoff version of relatively new hardware designs, don't expect a Kiesel or Strandberg quality. I've had a much better experience with the Harley Benton Fusion HSH for the same money.
I probably would have returned the guitar if I didn’t live on the opposite side of the Earth, due to the difficulties I had with the hardware. There definitely is a learning curve especially for those who are not familiar with locking tremolo systems, be prepared for it if you’re considering this guitar.
However once the set up was done, it plays fantastic and the tonal options are great too. I’m quite pleased with the performance of the guitar for sure.

Pros:
• Form factor – super comfortable to play in any position, and travel friendly
• Jumbo SS frets
• 5-way switch wiring provides useful tonal options
• Excellent tuning stability once set up correctly

Cons:
• Factory setup was subpar and I can see why because it’s a total pain in the ass to setup – maybe string changes will become easy eventually, but I’m really not keen to set this guitar up again. Hoping the roasted maple neck doesn’t move at all in the future.
• Too many small parts in the hardware, I’m scared to take it to rehearsals/gigs. If I accidently break a string, I know I will struggle to replace the string quickly, and potentially lose the small screws, plates, hex keys and whatnot.
• A couple of tuners are hard to turn, making fine tuning a bit tricky.

Future improvements that I would consider:
• Upgrade the hardware
• Fretboard rolled and fret ends rounded a bit more
• Get fret levelled and polished
• Swap out the pickups eventually


Here we go into the details:

A little bit of my background:
I've been playing for almost 20 years, owned several quality guitars including a couple of Fenders and played some of the finest instruments available in the market during my music school days. Now only playing as a hobby, so not really keen to spend big money anymore and I found peace with affordable quality gears.
I've been interested in this model ever since the first prototype was revealed at TGU19 but unfortunately I missed out on the first batch while waiting for a decent review. After the long wait I finally pulled my trigger on this roasted maple model and received the guitar in 8 days from Germany to New Zealand.

The body/overall form factor:
The guitar is very small, light, well balanced, and sits comfortably in all playing positions. The contours on the body really enhances the playing experience. It feels like driving a hatchback car after driving big sedans all your life.
The gig bag is a nice touch, small, decently padded and the guitar is light enough so I wouldn’t worry about getting damages while carrying around under normal conditions.
I’m not sure if I’m 100% happy with the colour, but they didn’t give me an option with the matte black body and the roasted maple neck.

The neck/fretboard:
The neck profile feels the same as the HB Fusion HSH that I had briefly. Modern C with smooth oil finish. The roasted maple smells nice. The fretboard (14 inch) is a bit flatter than how I prefer my electric guitars, but I didn’t have any issues with it so far.
The fretboard edges are rolled off and not sharp by any means, but I’ll put some more work into it to make it rounder. Same goes to the fret ends. Purely personal preference.
The frets are modern, jumbo SS frets. Unfortunately these are not polished to the highest standard, and I can see horizontal sanding marks most likely from levelling process that haven’t been fully buffed out. The rough surface is slightly noticeable when doing vibratos and bends. This will take some effort to buff out fully as the material is SS.
Doesn’t take much away from the playing experience, and still feels better than nickel frets on other guitars in this price range, but I can’t help but compare with my other guitar with mirror-polished SS frets which has that glassy slippery feel.
Also the frets are not perfectly levelled which again, is to be expected at this price point, I will eventually get them levelled and polished.
The neck was too straight with no relief when it arrived, but I was able to correct this easily with the truss rod adjustment which was smooth and responsive.
The colour of the fretboard is much lighter than the neck, both roasted maple but probably from a different blank. I didn’t mind this too much, but FYI.

Electronics:
The volume and tone controls work fine, and I think there is even a capacitor wired for high pass filter in the volume pot. The sound cleans up nicely without losing the clarity when I roll the volume down.
Pickups are surprisingly decent actually. Obviously would be a lot better with a pair of Suhrs or Seymour Duncans but I don’t think I’ll swap them out immediately.
The 5-way switch wiring is amazing. All positions give me a variety of very useful tones from the HH configuration, almost equivalent to a HSS strat.
The knobs and switches are in the right place, and do not get in the way of playing.

Hardware/set up:
This is where the guitar loses a lot of points. I’m usually very comfortable doing my own setups and DIY work on my guitars.
When I received the guitar, the action was high, like 4-5mm above 12 fret high. Ideal action for me is somewhere between 1.5-2mm.
To lower the action, first I have to loosen the small hex screw which locks the saddle height, which is odd because the saddle should not move anyway when there’s a string pushing it down, and the saddle wasn’t easy to turn at all anyway even with the strings loosened and moved out of the way. It’s very hard to turn with picks or even with flat head screwdrivers because of the way the slot is shaped, it feels like you almost need to have a dedicated tool just to turn these saddles.
After some serious effort, I realised the saddles reached the end and won’t go further down but the action was still far from ideal. This is where I had to bring the guitar to my local luthier and get the neck shimmed. Shimming on a bolt-on guitar is not a big deal at all, even a lot of Fenders get them at the factory but it would’ve been nice to have it shimmed and action set up before shipping out.
The luthier has shimmed the neck and raised the saddles a bit so I have some room to adjust for my preferences, currently the action sits at 2mm but I can’t go lower because the frets are not perfectly levelled as mentioned before, and will cause fret buzz.
The next step was to replace the factory strings with my preferred strings and get the intonation set up.
In order to do this, I need to loosen the strings, loosen the lock behind the nut with a big hex key, loosen the lock behind the saddle with a small hex key, and loosen the saddle from the plate for intonation adjustment with a medium hex key. Two hex keys required just to change strings and three if you want your guitar intonated.
Also I need to make sure that I don’t accidently loosen the lock behind the nut which holds the strings too much, otherwise the screw will fall off - which is not the end of the world, but there is a tiny round metal plate under the screw which helps hold the strings without breaking them when screwed down – this plate is not glued down, and one of mine fell out and fell between the switches in my Line 6 Helix. I had to open up my Helix just to get this tiny metal piece out, because I don’t know where I can get the replacement if I lose it. Too many small loose parts without any spare is a big downside.
And that lock behind the nut is rather slippery, so I needed to really tighten it to ensure the string is held in place, but at the same time I can’t tighten too hard because you may break the strings. I went through a couple extra each of the 1st, 2nd and 3rd strings because of this. I was seriously stressed out during this process which took me over 2 hours, and I still don’t know how hard I need to lock my strings without breaking them.
One last downside about the hardware, my other strings are fine but for the middle D and G strings, the tuner is very hard to turn. I’ve tried applying Teflon lube between the washers and the bearings, but didn’t help much. The bright side is since it’s essentially a double locking mechanism like a Floyd Rose, the tuning stability is fantastic and I don’t need to tune very often.

This may seem like a negative review, but I just wanted to make sure all the potential buyers are fully aware of what they’re getting into, because I certainly did not know about these when watching Youtube reviews.

Overall I’m quite happy with the guitar and keen to improve it where I can.
Helpful · Not helpful · Report
Report rating…

Do you believe this rating to be inaccurate or unacceptable for some reason?

Send report
Fretboard: Roastet Maple
Harley Benton Dullahan-FT 24 Roasted IB
(2)
Harley Benton Dullahan-FT 24 Roasted IB
to the product
NOK 4,399

Headless Electric Guitar Ergonomically shaped alder body, Bolt-on neck: Roasted Canadian flamed maple, Roasted maple fretboard, Fretboard inlays: Black offset dots, Neck profile: Modern C,...

  • Design: Headless
  • Colour: Blue
  • Soundboard: Alder
  • Fretboard: Roastet Maple
  • Frets: 24
  • Scale: 648 mm
  • Pickup System: SS
  • Tremolo: No
  • Incl. Case: No
  • Incl. Gigbag: No
Harley Benton Dullahan-FT 24 BKS
(5)
Harley Benton Dullahan-FT 24 BKS
to the product
NOK 3,799

Headless Electric Guitar Ergonomically shaped alder body, Bolt-on neck: Maple, Fretboard: Maple, Fretboard inlays: Black offset dots, Neck profile: Modern C, Fretboard radius: 350 mm, Scale: 648...

  • Design: Headless
  • Colour: Black
  • Soundboard: Alder
  • Top: None
  • Neck: Maple
  • Fretboard: Maple
  • Frets: 24
  • Scale: 648 mm
  • Pickup System: HH
  • Tremolo: No
  • Incl. Case: No
  • Incl. Gigbag: No
Harley Benton Dullahan-AT 24 TBK
(4)
Harley Benton Dullahan-AT 24 TBK
to the product
NOK 3,666

Headless Electric Guitar Ergonomically shaped mahogany body, Flamed maple veneer top, Bolt-on neck: Maple, Fretboard: Ebony, Fretboard inlays: Perloid offset dots, Neck profile: Modern C, Scale:...

  • Design: Headless
  • Colour: Black
  • Soundboard: Mahogany
  • Top: Maple
  • Neck: Maple
  • Fretboard: Ebony
  • Frets: 24
  • Scale: 648 mm
  • Pickup System: HH
  • Tremolo: No
  • Incl. Case: No
  • Incl. Gigbag: No
B-Stock from NOK 3,758 available
NOK 4,399
Plus NOK 200 shipping

Since we ship from Germany, additional costs through taxes and customs may be incurred

Dispatch expected by Tue, 29. September

Available immediately
Available immediately

This item is in stock and can be dispatched immediately.

Standard Delivery Times
Share This Product
Your Contacts
Phone: +49-9546-9223-20
FAX: +49-9546-9223-24
Online Guides
E-Guitars
E-Guitars
Electric guitars are ten a penny and nowadays there are at least as many models and makers to choose from.
 
 
 
 
 
test results:
Offers include VAT and are valid as long as stocks last. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
(6)
Recently Viewed
Behringer RD-6-SR

Behringer RD-6-SR; Analog Drum Machine; 8 Drum-Sounds: Bass Drum, Snare Drum, Low Tom, High Tom, Cymbal, Clap, Open Hi-Hat und Closed Hi-Hat; volume control for all instruments and the Accent track; build-in distortion effect with controls for intensity and tone;...

Recently Viewed
Fender Billie Eilish Concert Ukulele

Fender Billie Eilish Concert Ukulele, concert ukulele, signature, top and body sapele, nato neck, hardwood neck laminated, neck binding, 16 frets, nut width 35mm (1,375"), scale 381mm (15"), fishman kula preamp, open gear tuners, abalone rosette, finish black satin with...

Recently Viewed
Larry Carlton S7FM TBL

Electric Guitar Body: Alder, Top: Flamed maple, Bolt-on neck: Roasted maple, Fretboard: Roasted maple, Abalone Dots fretboard inlays, 22 Medium jumbo frets, Scale length: 648 mm (25.5"), Fretboard radius: 241 mm (9.5"), Nut width: 42 mm (1.65"), Bone nut,...

Recently Viewed
Fender CuNiFe Wide Range Humb. Neck

Fender CuNiFe Wide Range Humbucker Neck; Telecaster Humbucker; Resistance: 10.1 - 10.7k; Color: Chrome

Recently Viewed
Blackmagic Design UltraStudio Monitor 3G

Blackmagic Design UltraStudio Monitor 3G; Video output device for 3G-SDI and HDMI playback via laptop or desktop computer equipped with Thunderbolt 3; supports professional SDI and HDMI monitoring in 10-bit broadcast quality of material from common editing software such as...

Recently Viewed
Presonus AudioBox 96 Studio Ult 25th An

USB Audio Interface Recording Set Consists of AudioBox USB 96 25th Anniversary Edition, Studio One Artist + Studio Magic Plugin Suite (Ableton - Live Lite, Arturia - Analog Lab Lite 3 and many more) (ESD download), Eris E3.5 active...

Recently Viewed
Nux Optima Air NAI 5

Nux Optima Air NAI 5; Effects Pedal for Electric & Acoustic guitar; dual-switch acoustic guitar simulator with a preamp for acoustic and electric guitar, 15 built-in acoustic guitar profiles with IR level control, 9 Preset slots; Controls: Reverb, IR Level,...

(1)
Recently Viewed
Thomann ComboDesk88 - designed by Zaor

Producer Workstation Designed by Zaor, Ideal for home and project studios, Extremely sturdy and ergonomic construction, 19" Racks with a total of 3x 3 U, Includes cover plates for 19" racks for expanding the table surface and rack rail,...

(4)
Recently Viewed
Behringer RD-6-AM

Behringer RD-6-AM; Analog Drum Machine; Acid Smiley Edition; 8 Drum-Sounds: Bass Drum, Snare Drum, Low Tom, High Tom, Cymbal, Clap, Open Hi-Hat und Closed Hi-Hat; volume control for all instruments and the Accent track; build-in distortion effect with controls for...

Recently Viewed
Kala U-Bass Nomad 4 NT

Kala U-Bass Nomad 4 NT, acoustic-electric U-Bass, 20 13/16" (528 mm) scale, 29 3/8" (746 mm) overall length, Mahogany top, Mahogany back and sides, Mahogany neck, 16 frets, Rosewood fingerboard, Graph Tech NuBone nut, composite saddle, custom black die cast...

Recently Viewed
RME HDSPe AIO Pro

RME HDSPe AIO Pro; 30-channel PCI Express audio interface; 192 kHz / 24 bit; ADI-2 Pro converters AK5572 and 2 x AK4490; the entire analog input range relies on the circuit design of the ADI-2 Pro (+24 / +19 /...

Give Feedback
Feedback Found an error or want to give us feedback about this page?

We're looking forward to hearing from you and aim to solve any problems as soon as we can.