Allen & Heath ZED-10 / ZED 10FX- Rackkit

13

Rack Mount

  • Rack kit suitable for ZED 10 FX, ZED 10
Available since July 2011
Item number 268298
Sales Unit 1 piece(s)
1.250 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

13 Customer ratings

3.6 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

13 Reviews

C
Although pricey it comprises more than on the picture...
Clemcohen 26.01.2015
Installing the rack rails requires 2 types of screw drivers as taking of the side panels on a Zed 10 is not obvious.

The instructions are excellent and take you through each step as you will have to remove the power supply inside the Zed 10 in order to access the side panel screws (yes, really).

It also come with a rear panel to complete the vertical length to fill 8U space but I suggest buying a 1U unit with brushes to allow your cables to pass into your rack elegantly. If fact with a bit of cutting the Millennium Panel cut-out MKII unit sold by Thomann cab fit on top of the rear panel and save you 1U of space.

In the end, I am glad I decided to buy this kit instead of trying to improvise.
2
0
Report

Report

LB
Didn't Fit
Leslie B. 18.01.2015
I brought these rack mount for my ZED 10 FX. They didn't fit.
They are for the ZED 10.
Had to drill a couple of holes and made them fit.
I called Allen and Heath and they said i needed to buy ZED 10FX ones. Which i thought i had brought. But these only fit the ZED 10.
3
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
BF
Ein Rack-Kit für 69,- € ...
Bastian F. 16.02.2014
Verarbeitung ist top, genauso wie das ZED10, jedoch kann man für ein paar Winkel mit Schrauben keine 69,- € verlangen, das ist Wucher! Des Weiteren muss man das ZED10 ziemlich "zerlegen", damit man das Rack-Kit verschrauben kann und dabei wird auch noch gesagt, das Man Torx T10, Torx T20 und einen Kreuzschraubendreher benötigt; Stimmt aber leider nur zur Hälfte, denn man benötigt für die oberen Schrauben Torx T8 und das ist schon eine sehr außergewöhnliche Größe ...

Tut mir wirklich leid aber das sind zu viele Dinge, die für ein paar Winkel für 69,- €! nicht 5 Sterne wert sind.
3
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
Na
Gutes Mischpult mit einem schlechten Interface
Nikita aus S. 17.02.2012
Das ZED-10 ist ein sehr gutes kleines Mischpult! Das aber leider keine Wunder vollbringen kann.

Ich habe mir das ZED-10 für kleine Kaberett- und Kleinkunstshows zugelegt, wo es darum geht ein paar Zuspieler, Mikros und Gitarren auf kleine Anlagen zu schicken. Mit höchstens einem Monitorweg. Dazu wollte ich die Möglichkeit haben über das eingebaute USB-Interface Effekte und Zuspielungen aus dem Computer zu haben.

Und so siehts dann aus:

+ Ordentliche Verarbeitung
+ Völlig akzeptable Vorverstärker
+++ XLR-Ausgänge mit optionaler Pegelabdämpfung, falls das ZED-10 einen Submixer spielt.
+ 1 Semi-parametrisches Mittenband im EQ
+++ Cleveres und flexibles Routing, da hatte Allen&Heath ein paar gute Ideen.
Aber:
--- USB1.1. - Interface
------ OHNE Treiber!!!

Das ZED10 ist für die Größe und den Preis ein wunderbares Mischpult. Aber mit dem USB-Interface kann man nicht viel anfangen:

Man kann damit:

- Bei extremer Latenz solide mitschneiden. Aber wer will sowas? Für Mitschnitte holt man sich extra Interfaces.

- Bei mittlerer Latenz etwas aus einer DAW zuspielen. Zum Beispiel Atmosphären, oder einen Grundbeat.

- Man kann damit NICHT! : In Echtzeit ein VST-Instrument reinklimpern, oder einen VST-Effekt auf einen Kanal legen. Genau das hatte ich mir vom ZED-10 erhofft. Aber genau das Arbeiten unter 10ms-Latenz wollte nicht solide funktionieren. Mal gings, mal nicht.

Das ist das Problem an USB1.1. Interfaces ohne Firmentreiber. Es kann bei bestimmten Systemen mit ASIO4ALL gut funktionieren. Muss aber nicht.

Also gebe ich dem Allen&Heath ZED-10 "nur" 4 Sterne. Zu der eher guten Bewertung komme ich nur, weil die Konkurrenz KEIN besseres Angebot in dem Preisbereich macht! Es gibt für den Preis einfach keine Möglichkeit die Funktionalität eines Mischpults und eines SOLIDEN USB-Interfaces zu verbinden.
handling
features
19
15
Report

Report